Nottinghamshire · England
Bath re-enamelling & resurfacing in Rhodesia, Nottinghamshire
Bath re-enamelling in Rhodesia without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coating lifting around the plughole
Bath re-enamelling at your home in Rhodesia
We do not move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. If you’re dealing with a roll-top that’s seen better days and thin, worn enamel in places, we can generally put it right, whatever the material.
Big or small, it’s backed by a one-year guarantee.
- Location
- Rhodesia (S80)
- County
- Nottinghamshire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
We work cleanly and quietly. We protect the area first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Open a window if you can
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Advice
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Repair or replace in Rhodesia?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why us?
- Same prices wherever you are
- Technicians who travel to you, UK-wide
- Colour-matched on site
- One-year guarantee on every repair
See our prices page or resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Rhodesia?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Contact us if you’ve noticed any of these:
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
- Lots of chips and rust spots
- Thin, worn enamel in places
Questions to ask before booking
- How long it needs to cure
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- What happens if they find more damage
Work for landlords and builders
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Also in Rhodesia
FAQs for Rhodesia
What areas do you cover?
Everywhere in the UK, Rhodesia included. There is no extra charge for travel.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Nottinghamshire.
What information do you need?
Use the quote form or ring 0345 017 0787.
Keeping it looking good
Once the work has cured, treat it gently:
- Leave the bath for the full curing time before using it
- Don’t leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Don’t let dyes or oils sit on the finish
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- What the surface is made of
- The type of damage
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
You can take the photos on your phone. Ensure they show:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
What we can’t put right
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Our work in Rhodesia
Rhodesia is about 1 mile west of Worksop, in Nottinghamshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We cover all 329 towns and villages across Nottinghamshire, from the larger towns to small villages. You can also see our page for Leeds, about 38 miles away.
Jobs in S80 are booked in the same way as anywhere else. We regularly work on streets such as Tylden Road, Taiga Place and Marjorie Street. Other places close to Rhodesia include Shireoaks (1 mile north-west), Gateford (1 mile north), Worksop (1 mile east), Netherthorpe (2 miles west) and Kilton (2 miles east). Larger places within reach include Mansfield (12 miles south), Sutton in Ashfield (14 miles south), Retford (9 miles east), Mansfield Woodhouse (10 miles south), Kirkby-in-Ashfield (15 miles south) and Forest Town (11 miles south).
Around Rhodesia
In Rhodesia, that means homes near Outwood Academy Valley, St Luke's Church and Haggonfields Primary and Nursery School. Rhodesia’s nearest station is Shireoaks station, about 1 mile north-west. Further afield, we also cover the area around Worksop Castle (1.3 miles south-east) and Creswell Crags Museum and Heritage Centre (3.2 miles south-west). Not far away are Sandhill Lake.
About our accreditations · Every repair comes with a one-year guarantee.
