Cornwall · England
Bath Re-enamelling in Marazion
Local bath re-enamelling for Marazion: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- Wear marks under the taps
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before you book. We look at:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The type of damage
- How hard the colour is to match
Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
It only takes a minute to photograph the damage. Try to send:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Any details about the material
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Bath re-enamelling at your home in Marazion
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for enamel that’s lost its shine and feels rough and a roll-top that’s seen better days, in acrylic baths, basins & shower trays and pressed steel baths.
Big or small, it’s backed by a one-year guarantee.
- Location
- Marazion (TR17)
- Area hub
- Cornwall
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Marazion
More services for Marazion
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repair or replace in Marazion?
A replacement often means several trades over several days. Re-enamelling is one technician, normally one day, with the bath back in use the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
What you get with us
- Technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
- No extra charge for your area
Take a look at our full price list and bath cost comparison.
The process
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Covering Marazion
Marazion is about 3 miles east of Penzance, in Cornwall. Wherever you are in the TR17 postcode area, a technician comes to you. Marazion is one of 644 towns and villages in Cornwall where we work.
Every address in TR17 is within our area. You will find streets such as Market Place, Trevenner Square and Praed's Lane, and we cover them all. Close by, we cover Tregurtha Downs (1 mile east), Perranuthnoe (1 mile south-east), Varfell (1 mile north-west), Goldsithney (1 mile east) and Crowlas (2 miles north). Larger places within reach include Camborne (10 miles north-east), Redruth (13 miles north-east), Penzance (3 miles west), Helston (9 miles east), Hayle (5 miles north-east) and St Ives (6 miles north).
Around Marazion
Our customers here include homes close to The Kings Arms, Marazion School and Church of All Saints. The nearest railway station is Penzance station, roughly 2.8 miles west. Well-known places in the area include St Michael's Mount Castle (0.7 miles south-west) and St Michael's Mount Castle (0.7 miles south-west). For a walk, there’s Marazion Marsh RSPB Reserve and Castle an Dinas.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Leave the bath for the full curing time before using it
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Landlords, agents and businesses in Marazion
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Your questions about bath re-enamelling in Marazion
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
How do I get a price for bath re-enamelling in Marazion?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Do the materials smell?
Expect a mild smell while we’re working.
Are there extra charges for Marazion?
No. Our quotes include travel, and we charge the same wherever you are.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Which areas do you work in?
All of Cornwall, and the rest of the UK. Travel is included in the price.
About our accreditations · Every repair comes with a one-year guarantee.
