Sefton · England
Bath Re-enamelling in Marshside
Problem with your bath in Marshside? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
What happens on the day
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow the best part of a day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Related advice
Bath re-enamelling in Marshside without replacing anything
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for staining under the taps and around the waste and several chips and rust patches, on basins & shower trays, Victorian roll-tops and pressed steel baths.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Where
- Marshside (PR9)
- County
- Sefton
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Other services in Marshside
How we price bath re-enamelling
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The material and finish
- What kind of damage it is
- How hard the colour is to match
- Where the damage is and how we get to it
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Quotes from your photos
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- Something in shot to show the size
- A wider photo showing the entire bath
- A clear, close picture of the problem area
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Your questions about bath re-enamelling in Marshside
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Can you quote from pictures?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you cover the entire of Sefton?
Across the UK, so Marshside is covered. Prices don’t change with location.
Our work in Marshside
Marshside is about 2 miles north-east of Southport, in Sefton. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Marshside is one of 36 towns and villages in Sefton we cover. Our nearest city page is Liverpool, about 18 miles away.
Postcode districts we cover here: PR9. We regularly work on streets such as Fylde Road, Eden Avenue and Paul's Lane and the roads around them. Close by, we cover Churchtown (1 mile south), Crossens (1 mile east), High Park (1 mile south), Blowick (2 miles south) and Banks (2 miles east). Further out, we also cover Bootle (14 miles south), Formby (9 miles south-west), Maghull (11 miles south), Litherland (14 miles south), Seaforth (14 miles south) and Ford (13 miles south).
Local landmarks in Marshside
Around Marshside, we work in homes near Presfield High School and Specialist College, Church of Emmanuel and Marshside Primary School and the streets around them. Nearby too are Hesketh Park (1.1 miles south-west) and Stanley High School (Southport) (within half a mile north-west). Marshside’s nearest station is Meols Cop station, about 1.6 miles south of the centre. Nearby you’ll also find Southport Promenade Hospital (1.6 miles south-west) and Museum of Buffoonery (2 miles south-west). Green spaces nearby include Marshside RSPB reserve.
Do you need bath re-enamelling in Marshside?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Keep an eye out for any of the following:
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
- Several chips and rust patches
- A roll-top that is seen better days
What your quote should include
- Who turns up on the day
- What happens if they find more damage
- How to look after the finish
- What prep work is covered
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Repairing versus replacing in Marshside
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why Marshside customers choose us
- Technicians who travel to you, UK-wide
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
- One price list for the whole UK
Read our pricing and bath cost comparison.
Honest limits
We will not take on work that will not last, so here’s what a repair can’t put right:
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
Send us photos and we’ll tell you honestly.
Materials we work on in Marshside
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
