Sefton · England
Bath re-enamelling & resurfacing in Formby, Sefton
Our repair technicians come to Formby for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
What a repair can’t fix
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Bath re-enamelling in Formby without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. Our repair technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people get in touch are worn patches where water runs and sits and a period or roll-top bath worth keeping.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Formby (L37)
- Area hub
- Sefton
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Landlords, agents and businesses in Formby
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
How the visit works
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. It normally takes a full day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Let us know if it has been repaired before
- Have a window or extractor fan available
- Keep a parking space free if you can
Ask for a price
Email us a photo of the damage and one of the entire item, and tell us you’re in Formby, and we will reply with a fixed quote.
Read more
Formby and nearby
Formby is about 6 miles south-west of Southport, in Sefton. Whether you are in the middle of Formby or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 36 towns and villages in Sefton. Our nearest city page is Liverpool, about 12 miles away.
Every address in L37 is within our area. That includes homes on Church Road, St Luke's Church Road and Dukes Way and the roads around them. Formby sits on or near the A565 and B5195, so getting to you is simple. If you are just outside Formby, we cover Freshfield (1 mile north-west), Little Altcar (1 mile south-east), Great Altcar (2 miles east), Hightown (2 miles south) and Lady Green (2 miles south-east). Within a short drive, we also cover Southport (6 miles north-east), Bootle (7 miles south-east), Maghull (6 miles south-east), Litherland (6 miles south-east), Seaforth (6 miles south) and Ford (6 miles south-east). Formby is among the bigger towns we cover in Sefton.
What’s near Formby
Typical jobs here are in homes near The Lifeboat pub, Redgate Community Primary School and Formby High School and the streets around them. There is a railway station in Formby itself: Formby station. Other landmarks nearby include The Village Museum (3.7 miles south-east). Open spaces near Formby include Formby Red Squirrel Reserve.
Formby: your questions answered
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
How do I get a price for bath re-enamelling in Formby?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
What we are called out for in Formby
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Contact us if you’ve noticed:
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
What to look for in a quote
- Whether they match the colour on site
- How to look after the finish
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Formby
- One-year guarantee on every repair
- One price list for the whole UK
- Technicians who travel to you, UK-wide
- Fixed prices from your pictures
Take a look at our pricing or guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Formby. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The material
- How hard the colour is to match
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- A picture taken from further back
- Where you are, by postcode
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Nearby places to Formby
Other services in Formby
About our accreditations · Every repair comes with a one-year guarantee.
