North Yorkshire · England
Bath Re-enamelling in Marske
Bath re-enamelling for Marske, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
Bath re-enamelling in Marske, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a bath in a colour that no longer suits and thin, worn enamel in places, on basins & shower trays, cast iron baths and acrylic baths.
Every job is backed for twelve months in Marske and everywhere else. If something goes wrong with the work, we come back.
- Location
- Marske (DL11)
- Area hub
- North Yorkshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Do not let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Never use suction bath mats
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
When a repair isn’t the answer
Before you book, it’s worth knowing the limits:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Marske
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Marske. The price depends on:
- The size and number of damaged areas
- The material
- How many items we do on one visit
- Whether old repairs or coatings need taking off
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
When you take your pictures, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
Email us pictures of the damage and one of the whole item, and tell us you are in Marske, and we’ll come back with a fixed quote.
Marske questions
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we will plan for it.
Marske and nearby
Marske is about 6 miles west of Catterick Garrison, in North Yorkshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Marske is one of 626 places in North Yorkshire where we work. Our jobs stretch from Marske to Newcastle upon Tyne (41 miles away).
We work across the DL11 postcode area and the streets around it. We also cover the places around Marske: Skelton (1 mile west), Hudswell (2 miles east), Marrick (2 miles south-west), Washfold (3 miles north-west) and Brokes (3 miles east). Within a short drive, we also cover Catterick Garrison (6 miles east), Richmond (4 miles east), Colburn (6 miles east), Bedale (13 miles south-east), Aiskew (13 miles south-east) and Catterick (8 miles east).
Near you in Marske
We visit homes around Church of St Edmund King and Martyr and the streets around them. Nearby you will also find Richmond Castle (4.1 miles east) and Friary Community Hospital (4.1 miles east).
Also near Marske
What else we do in Marske
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
What we’re called out for in Marske
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Send us a picture if you notice any of these:
- Chips and rust in more than one place
- A coloured bath you want in white
- A coating lifting around the plughole
- Worn patches where water runs and sits
What to look for in a quote
- Whether they match the colour on site
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- One visit for most repairs
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- Work done at your home or business
Read our prices page and guide to resurfacing and replacement costs.
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
