North Yorkshire · England
Bath Re-enamelling for Bedale homes
Full bath re-enamelling and resurfacing at your home in Bedale, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coating lifting around the plughole
- Thin, worn enamel in places
Bath re-enamelling in Bedale without replacing anything
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. If you are dealing with a bath in a colour that no longer suits and staining under the taps and around the waste, we can generally put it right, on cast iron baths, basins & shower trays and Victorian roll-tops alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Bedale and across North Yorkshire.
- Location
- Bedale (DL8)
- Region
- North Yorkshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Bedale
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
The most common problems we’re called about are:
- A roll-top that’s seen better days
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
Comparing quotes
- How your room will be protected
- Whether a trained technician does the job
- Is the price fixed, and does it include VAT?
- What prep work is covered
Towns and villages near Bedale
Also in Bedale
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
How we price bath re-enamelling
Prices start from £350. You will know the full cost before booking. We take into account:
- Whether we combine several jobs
- How easy the damage is to reach
- The colour and finish to match
- The size and number of damaged areas
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A close-up of the damage, in focus
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say straight away if a repair is the right fix.
Bedale and the surrounding area
Bedale is about 7 miles south-west of Northallerton, in North Yorkshire. Jobs in Bedale are booked in like any other job: a fixed price from your photos, then a visit to do the work. We cover all 626 towns and villages in North Yorkshire. You can also see our page for Leeds, about 33 miles away.
Postcode districts we cover here: DL8. That includes homes on Market Place, Benkhill Drive and Kendrew Close and the roads around them. You’ll find Bedale on the B6268 and B6285, so it’s easy for us to reach. Close by, we cover Aiskew (1 mile north-east), Exelby (2 miles east), Londonderry (2 miles east), Snape (2 miles south) and Leeming (3 miles east). Larger places within reach include Ripon (11 miles south), Catterick Garrison (8 miles north-west), Northallerton (7 miles north-east), Richmond (10 miles north-west), Thirsk (11 miles east) and Colburn (8 miles north-west).
Around Bedale
Locally, our jobs take us to homes close to Church of St Gregory, Bedale Church of England Primary School and The White Bear pub, among other places. Further afield, we also cover the area around Bedale Castle (within half a mile north) and Bedale Museum (less than half a mile north).
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why Bedale customers choose us
- Most jobs done in one visit
- Work done at your home or business
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
Read our prices page or bath cost comparison.
Landlords, agents and businesses in Bedale
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
When a repair isn’t the answer
It helps to know what we cannot do too:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
The process
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
Bedale: your questions answered
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Which areas do you work in?
We work UK-wide, and that includes Bedale. Prices don’t change with location.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
About our accreditations · Every repair comes with a one-year guarantee.
