Cheshire East · England
Bath Re-enamelling in Martin's Moss
Full bath re-enamelling and resurfacing at your home in Martin's Moss, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that is failing
- Stains that won’t shift
About our bath re-enamelling in Martin's Moss
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include thin, worn enamel in places and an outdated colour you’d like to change, in Victorian roll-tops, basins & shower trays and cast iron baths.
All of our repairs are guaranteed for twelve months in Martin's Moss and everywhere else. We return to put right any problem with the work.
- Area
- Martin's Moss (CW11)
- County
- Cheshire East
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Related advice
What affects the price in Martin's Moss
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The material and finish
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- How much damage there is
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Any details about the material
- A wider photo showing the entire bath
- Your postcode, so we can check dates
- A clear, close picture of the problem area
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why Martin's Moss clients choose us
- We’ll tell you if it’s not worth repairing
- One price list for the entire UK
- Colour-matched on site
- A fixed quote before you book
Read our prices page and resurfacing vs replacement cost guide.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Also near Martin's Moss
More services for Martin's Moss
FAQs for Martin's Moss
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What areas do you cover?
Across the UK, and that includes Martin's Moss. Prices do not change with location.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Covering Martin's Moss
Martin's Moss is about 3 miles east of Sandbach, in Cheshire East. Clients in Martin's Moss get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 254 towns and villages in Cheshire East, from the larger towns to small villages. Our nearest city page is Manchester, about 23 miles away.
Our visits in CW11 are booked in the same way as anywhere else. You will find streets such as Little Back Lane and Martins Moss, all of which we cover. We also travel to Smallwood (1 mile south-east), Fourlanes End (1 mile south), Brookhouse Green (1 mile north-east), Mossend (1 mile north) and Smethwick Green (2 miles north). We also work in nearby towns such as Crewe (7 miles south-west), Macclesfield (11 miles north-east), Congleton (4 miles east), Wilmslow (13 miles north), Nantwich (11 miles south-west) and Knutsford (11 miles north).
Near you in Martin's Moss
Our customers here include homes close to The Bulls Head pub, Smallwood CofE Primary School and St John the Baptist's Church and the streets around them. The nearest railway station is Alsager station, roughly 3.5 miles south of the centre. Further afield, we also cover the area around Mow Cop Castle (4.1 miles south-east). Open spaces near Martin's Moss include Brookhouse Moss and Astbury Mere.
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
What we’re called out for in Martin's Moss
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Look out for any of the following:
- Brown or grey marks that do not clean off
- A coloured bath you want in white
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
Questions to ask before you book
- Who turns up on the day
- Whether they match the colour on site
- How long the guarantee is and what it covers
- What prep work is covered
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
