Warwickshire · England
Bath re-enamelling & resurfacing in Marton, Warwickshire
Damaged bath in Marton? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- No need to remove anything
- No extra charge for your area
- Free fixed quotes from pictures
- CHAS, Constructionline and SafeContractor accredited
Read our prices page or bath cost comparison.
Bath re-enamelling at your home in Marton
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We regularly repair Victorian roll-tops, cast iron baths and pressed steel baths, and common reasons people contact us are thin, worn enamel in places and a coating lifting around the plughole.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Marton (CV23)
- Region
- Warwickshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to most of the day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Keep pets and children out of the room while we work
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
Get a quote
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Landlord and trade work in Marton
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Places near Marton
More services for Marton
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Marton. The price comes down to:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- Access to the area
- Doing more than one item at once
Compared with replacing, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- One picture of the whole bath
- What it’s made of, if you know
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Marton, and we will reply with a fixed quote.
Marton and the surrounding area
Marton is about 6 miles east of Royal Leamington Spa, in Warwickshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 324 places across Warwickshire, from the larger towns to small villages. We work right across the region, from Marton to Birmingham (23 miles away).
Our visits in CV23 work the same way as everywhere else we cover. From High Street, The Orchard and Oxford Road or anywhere nearby, a technician can come to you. Close by, we cover Princethorpe (1 mile north), Hunningham (2 miles west), Stretton-on-Dunsmore (2 miles north), Weston under Wetherley (3 miles west) and Bubbenhall (4 miles north-west). Within a short drive, we also cover Rugby (7 miles north-east), Nuneaton (15 miles north), Warwick (8 miles west), Royal Leamington Spa (6 miles west), Bedworth (12 miles north) and Leamington Spa (6 miles west).
Local landmarks in Marton
Our clients here include homes close to The Plough pub and Church of St Esprit, among other places. Other landmarks nearby include Warneford Hospital (5.6 miles south-west) and Brandon Castle (4.5 miles north). Open spaces near Marton include Hensborough Hill and Ryton Wood Meadows.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
What we are called out for in Marton
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Look out for any of the following:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- A coloured bath you want in white
Comparing quotes
- Who turns up on the day
- What happens if they find more damage
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
What we cannot put right
We’ll always be straight with you, so here’s what a repair will not do:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Common questions in Marton
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
How do I get a price for bath re-enamelling in Marton?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Do you cover the whole of Warwickshire?
All of Warwickshire, and the rest of the UK. There is no extra charge for travel.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
About our accreditations · Every repair comes with a one-year guarantee.
