Aberdeenshire · Scotland
Bath Re-enamelling for Maud homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Maud. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A roll-top that is seen better days
- Stains that will not shift
About our bath re-enamelling in Maud
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Our repair technicians work on cast iron baths, Victorian roll-tops and pressed steel baths, and people most frequently call us about an original cast iron bath that needs restoring and an old resurfacing that’s failing.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Maud (AB42)
- Region
- Aberdeenshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
FAQs for Maud
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you redo someone else’s repair?
Typically, yes. The old repair comes out first, so let us know about it.
How long is the bath unusable?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
What areas do you cover?
Across the UK, and that includes Maud. Our prices are the same everywhere.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Aberdeenshire.
Other services in Maud
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Maud and the surrounding area
Maud is about 12 miles south of Fraserburgh, in Aberdeenshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Maud is one of 161 towns and villages in Aberdeenshire we cover.
Postcode districts we cover here: AB42. Whether you live on Market Street, School Road and Deer Road or a nearby road, we can come to you. Close by, we cover New Deer (2 miles west), Turfhill (3 miles west), Old Deer (3 miles east), Stuartfield (3 miles east) and Auchnagatt (4 miles south). Larger places within reach include Peterhead (12 miles east), Fraserburgh (12 miles north), Ellon (11 miles south), Turriff (12 miles west), Roanheads (13 miles east) and Clerkhill (12 miles east).
What’s near Maud
Typical jobs here are in homes near Maud. A little further out are Maud Junction railway station (within half a mile east) and Brucklay Castle (1.6 miles north-west). Not far away are Pitfour Lake.
How it works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It normally takes a full day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- The size and number of damaged areas
- The material and finish
- What kind of damage it is
- Previous DIY repairs that have to come out
Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- The material, if you know it
- The postcode, so we can plan the visit
If you’re in Maud and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Aftercare tips
Looking after the surface is easy:
- Avoid suction-cup mats
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Common problems we fix in Maud
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
These are the problems we’re asked about most:
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
What your quote should include
- Aftercare advice
- Who will actually do the work
- How your room will be protected
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
