Aberdeenshire · Scotland
Bath Re-enamelling for Fraserburgh homes
Problem with your bath in Fraserburgh? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A roll-top that is seen better days
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams in Aberdeenshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Bath re-enamelling in Fraserburgh, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s lots of chips and rust spots and brown or grey marks that don’t clean off, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Fraserburgh (AB43)
- Area hub
- Aberdeenshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Fraserburgh
Other services in Fraserburgh
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Don’t leave a chip unrepaired
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- What kind of damage it is
- Any earlier repairs that need removing first
- How hard the colour is to match
- What the surface is made of
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from photos
Before you send pictures, these tips help us give you a firm price:
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take most of the day, and we’ll tell you if anything changes.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Clear the area around the damage
- Let the surface dry out before the visit
- Let us know about parking or access
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
About Fraserburgh
Fraserburgh is about 37 miles north of Aberdeen, in Aberdeenshire. Across the AB43 area, we carry out the work at your property. We work in 161 places in Aberdeenshire, from the larger towns to small villages.
All of AB43 is covered, from the main roads to the quietest streets. Streets in the area include High Street, Main Street and Thompson Terrace, and we cover them all. With the A90 and A98 close by, Fraserburgh is simple for us to get to. If you are just outside Fraserburgh, we cover Broadsea (1 mile north), Sandhaven (2 miles north-west), Pittulie (2 miles north-west), Memsie (3 miles south-west) and Inverallochy (3 miles east). Further out, we also cover Peterhead (15 miles south-east), Roanheads (15 miles south-east), Clerkhill (15 miles south-east), Port Henry (15 miles south-east), Mintlaw (11 miles south) and Longside (12 miles south). Fraserburgh is one of the larger places we cover in Aberdeenshire.
Local landmarks in Fraserburgh
Around Fraserburgh, we work in homes near The Saltoun Inn, Fraserburgh Academy and Fraserburgh, among other places. A little further out are Fraserburgh Hospital (under half a mile north) and Fraserburgh Heritage Centre (0.9 miles north-east).
Common questions in Fraserburgh
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
How much does bath re-enamelling cost in Fraserburgh?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, with the bath back in use the day after. Prices start from £350. A repair is priced on what needs doing, not where you live. You will see the full price before you book.
What you get with us
- Generally one visit, start to finish
- Colour-matched on site
- We come to you, anywhere in the UK
- One-year guarantee on every repair
Read our full price list or guide to resurfacing and replacement costs.
Common problems we fix in Fraserburgh
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Look out for these signs:
- Thin, worn enamel in places
- Stains that won’t shift
- A coating lifting around the plughole
- Chips and rust in more than one place
Questions to ask before you book
- What aftercare is recommended
- Whether a trained technician does the job
- How the colour is matched
- If travel is included in the price
About our accreditations · Every repair comes with a one-year guarantee.
