Cornwall · England
Bath re-enamelling & resurfacing in Meaver, Cornwall
Our technicians come to Meaver for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that is seen better days
How we handle bath re-enamelling in Meaver
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Common call-outs are for worn patches where water runs and sits and a coating lifting around the plughole, in cast iron baths, acrylic baths and Victorian roll-tops.
Every repair comes with our one-year guarantee.
- Where
- Meaver (TR12)
- Area hub
- Cornwall
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Meaver?
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
Most people contact us after spotting one of these:
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
- A roll-top that’s seen better days
Comparing quotes
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What affects the price in Meaver
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- The material and finish
- Where the damage is and how we get to it
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- Details of any past repairs
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- What it’s made of, if you know
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What we cannot put right
We will always be straight with you, so here’s what a repair cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Nearby places to Meaver
Other services in Meaver
FAQs for Meaver
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you quote from pictures?
Nearly always. If photos do not show enough, we will ask for another angle.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Related advice
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- One visit for most repairs
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
See our full price list and guide to resurfacing and replacement costs.
Covering Meaver
Meaver is about 6 miles south of Helston, in Cornwall. Our repair technicians come to customers in Meaver and nearby villages, so you do not need to take anything anywhere. Meaver is one of 644 towns and villages in Cornwall where we work.
Every address in TR12 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Mullion (1 mile west), Mullion Cove (1 mile south-west), Hendra (1 mile south-east), Cross Lanes (2 miles north) and Cury (2 miles north). Further out, we also cover Falmouth (11 miles north-east), Camborne (13 miles north), Redruth (14 miles north), Penzance (15 miles north-west), Helston (6 miles north) and Hayle (14 miles north-west).
Local landmarks in Meaver
Locally, our jobs take us to homes close to Mullion School, Church of St Melaines and Manaccan Primary School. Well-known places in the area include Helston Community Hospital (4.8 miles north) and The Marconi Centre (1.5 miles west). The countryside around Meaver includes The Loe and Goonhilly Downs.
- Parks and local facilities nearby include Grade (2.9 miles south-east)
About our accreditations · Every repair comes with a one-year guarantee.
