Denbighshire · Wales
Bath Re-enamelling in Meliden
We travel to Meliden for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- Thin, worn enamel in places
Bath re-enamelling in Meliden without replacing anything
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with a coloured bath you want in white and a period or roll-top bath worth keeping, we can help, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Meliden (LL19, LL18)
- County
- Denbighshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
When we would advise against a repair
A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:
- Holes rusted through the metal
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
Send us pictures and we will tell you honestly.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Signs you need bath re-enamelling in Meliden
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Typical reasons for a call-out include:
- An old resurfacing that’s failing
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
- Worn patches where water runs and sits
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- Whether the price covers travel
- Whether they match the colour on site
Meliden and nearby
Meliden (Welsh: Gallt) is about 1 mile south of Prestatyn, in Denbighshire. Whether you’re in the middle of Meliden or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 81 places in Denbighshire. Our nearest city page is Liverpool, about 21 miles away.
Jobs in LL19 and LL18 work the same way as everywhere else we cover. You’ll find streets such as The Grove, Ffordd Talargoch and Llwyn Mesen. Other places close to Meliden include Tan-yr-allt (1 mile south-east), Bryniau (1 mile south-east), Dyserth (1 mile south), Prestatyn (1 mile north) and Y Ffrith (1 mile north-west). Larger places within reach include Denbigh (9 miles south), Ruthin (15 miles south), Kinmel Bay (4 miles west), Fron (9 miles south), Copenhagen (9 miles south) and Bryn Seion (9 miles south).
Near you in Meliden
We visit homes around Ffrith Beach Arena Park, Ysgol Melyd and Prestatyn High School. Nearby too are Star Inn (within half a mile south-east) and Church Of St Melyd (within half a mile north-east). For rail, the closest station is Prestatyn station, about 1.4 miles north. Nearby you will also find Prestatyn Community Hospital (0.8 miles north-east) and Graig Fawr (less than half a mile south). For a walk, there is Marine Lake and Graig Fawr.
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow the best part of a day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
Get a quote
If you’re in Meliden and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Repair or replace in Meliden?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why Meliden customers choose us
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- Most jobs done in one visit
Take a look at our pricing and guide to resurfacing and replacement costs.
Common questions in Meliden
What happens next?
We come back with a fixed price, generally with dates to choose from. You are under no obligation.
How long does re-enamelling take?
Usually one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Are there extra charges for Meliden?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Also in Meliden
Landlords, agents and businesses in Meliden
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Meliden, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
What affects the price in Meliden
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- What the surface is made of
- How much damage there is
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- Any earlier repairs or coatings
- A photo taken from further back
- What it’s made of, if you know
- A coin beside the damage so we can judge size
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
