Neath Port Talbot · Wales
Bath re-enamelling & resurfacing in Melincourt, Neath Port Talbot
Full bath re-enamelling and resurfacing at your home in Melincourt, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
How we handle bath re-enamelling in Melincourt
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We work on basins & shower trays, Victorian roll-tops and cast iron baths, and common reasons people contact us are a peeling or bubbling previous coating and staining under the taps and around the waste.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Melincourt (SA11)
- Area hub
- Neath Port Talbot
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Melincourt
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Most people get in touch after spotting something like this:
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
Before you book anyone
- If travel is included in the price
- How long it needs to cure
- The length of the guarantee and what it covers
- Whether a trained technician does the job
Your questions about bath re-enamelling in Melincourt
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do you work in Melincourt?
Yes, we do. We send a technician to Melincourt for every job, with no extra charge for travel.
How long is the bath unusable?
Most baths are done in a day, ready the next day. We’ll confirm timings when we quote.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
What areas do you cover?
We work UK-wide. Prices don’t change with location.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Work for landlords and builders
Landlords, letting agents and housing providers in Melincourt use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Melincourt, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Nearby places to Melincourt
More services for Melincourt
What a repair can’t fix
We’d rather lose a job than do one that will not last, so these are the limits:
- A bath split right through the body
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Repair or replace in Melincourt?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why Melincourt customers choose us
- Colours mixed by hand to suit your surface
- Work done at your home or business
- Normally one visit, start to finish
- Everything repaired in place
Read our full price list or guide to resurfacing and replacement costs.
What we do, step by step
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Advice
Prices and what affects them
Prices start from £350. You’ll know the full cost before booking. We take into account:
- How many areas need work
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- What it’s made of, if you know
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- Details of any past repairs
To get a price, send a couple of pictures using our quote form or call us. We’ll say straight away whether it can be repaired.
Keeping it looking good
So the finish stays in good condition:
- Rinse off hair dye, oils and bath bombs right away
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
- A dripping tap should be fixed promptly
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Our work in Melincourt
Melincourt is about 5 miles north-east of Neath, in Neath Port Talbot. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We cover 100 places across Neath Port Talbot.
Postcode districts we cover here: SA11. From Lletty Dafydd, Llys Dwfnant and Hill Street or a nearby road, a technician can come to you. We also cover the places around Melincourt: Melin-cwrt (1 mile north-east), Abergarwed (1 mile north), Resolven (1 mile north-east), Creunant (2 miles north-west) and Tre-Forgan (3 miles north-west). Further out, we also cover Neath (5 miles south-west), Port Talbot (8 miles south-west), Sandfields (8 miles south-west), Mount Pleasant (5 miles south-west), Baglan Moors (8 miles south-west) and Sandfields West (8 miles south-west).
Near you in Melincourt
Locally, our jobs take us to homes close to Ynysfach Primary School and the streets around them. Melincourt’s nearest station is Neath station, about 4.7 miles south-west of the centre. Other landmarks nearby include Tonna Hospital (2.6 miles south-west) and Gnoll House (4.3 miles south-west). The countryside around Melincourt includes Mynydd Blaenafon and Gnoll Estate Country Park lake 1.
- Parks and local facilities nearby include Neath Lower (1 mile west)
About our accreditations · Every repair comes with a one-year guarantee.
