County Durham · England
Bath re-enamelling & resurfacing in Metal Bridge, County Durham
Local bath re-enamelling for Metal Bridge: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
Metal Bridge: your questions answered
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
What information do you need?
Use the quote form or ring 0345 017 0787.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Bath re-enamelling at your home in Metal Bridge
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s a period or roll-top bath worth keeping and a coloured bath you want in white, we can normally put it right.
You get a one-year guarantee, the same in Metal Bridge as everywhere else we work.
- Area
- Metal Bridge (DH6)
- County
- County Durham
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also in Metal Bridge
Repairing versus replacing in Metal Bridge
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Prices start from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Metal Bridge
- Fixed prices from your pictures
- We leave the room as we found it
- One visit for most repairs
- Colour-matched on site
See our pricing and resurfacing vs replacement cost guide.
Where we work around Metal Bridge
Metal Bridge is about 3 miles east of Spennymoor, in County Durham. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in all 329 towns and villages across County Durham, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 20 miles away.
Our visits in DH6 work the same way as everywhere else we cover. If you’re just outside Metal Bridge, we cover Tursdale (1 mile north-east), Cornforth (1 mile south-east), Thinford (1 mile west), Coxhoe (1 mile east) and Hett (2 miles north-west). Larger places within reach include Durham (5 miles north), Newton Aycliffe (6 miles south), Bishop Auckland (7 miles south-west), Spennymoor (3 miles west), Seaham (12 miles north-east) and Chester-le-Street (10 miles north).
Around Metal Bridge
Locally, our jobs take us to homes close to Church of the Holy Trinity, Ferryhill Business and Enterprise College and West Cornforth Primary School. Well-known places in the area include Thornlaw (4.2 miles north-east) and Sherburn Hospital (4.1 miles north).
When a repair isn’t the answer
A repair is not always the answer, and we would rather say so up front. We cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Metal Bridge
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- Rinse off hair dye, oils and bath bombs straight away
- Repair dripping taps early
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day. We leave the room clean and you will know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us about parking, stairs or access
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
What affects the price in Metal Bridge
Resurfacing from £350. We charge the same across the UK, including Metal Bridge. What changes the price is:
- How much damage there is
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- How hard the colour is to match
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- One picture of the whole bath
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A clear, close picture of the problem area
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Do you need bath re-enamelling in Metal Bridge?
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Signs it’s time to call us include:
- Wear marks under the taps
- Stains that will not shift
- A roll-top that is seen better days
- A bath in a colour that no longer suits
Comparing quotes
- How soon you can use it again
- How the room is protected while they work
- A fixed price, and whether VAT is included
- How long the guarantee is and what it covers
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
