County Durham · England
Bath Re-enamelling for Cornforth homes
Bath re-enamelling in Cornforth without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- Lots of chips and rust spots
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take most of the day, and you can get on with other things while we’re there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Ensure the room can be ventilated
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
Bath re-enamelling in Cornforth without replacing anything
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the day after. Our technicians work on acrylic baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a dull, rough surface that won’t come clean and stains that won’t shift.
All our work is covered by our one-year guarantee, wherever you are in County Durham.
- Location
- Cornforth (DL17)
- Area hub
- County Durham
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Cornforth
Cornforth is about 4 miles east of Spennymoor, in County Durham. From the centre of Cornforth to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Cornforth is one of 329 towns and villages in County Durham we cover. We work right across the region, from Cornforth to Newcastle upon Tyne (about 21 miles away).
We cover every part of DL17 and the streets around it. Local streets include High Street, Station Road and Middleham Road, and we cover them all. Neighbouring places we cover include Metal Bridge (1 mile north-west), Coxhoe (1 mile north-east), Tursdale (1 mile north-west), Thinford (2 miles west) and Hett (3 miles north-west). We also work in nearby towns such as Durham (6 miles north-west), Newton Aycliffe (6 miles south-west), Bishop Auckland (7 miles south-west), Spennymoor (4 miles west), Seaham (11 miles north-east) and Chester-le-Street (11 miles north).
Near you in Cornforth
Locally, our jobs take us to homes close to Church of the Holy Trinity and West Cornforth Primary School. Further afield, we also cover the area around Thornlaw (3.9 miles north-east) and Sherburn Hospital (4.6 miles north).
Cornforth questions
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Signs you need bath re-enamelling in Cornforth
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
Typical reasons for a call-out include:
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
Questions to ask before you book
- How soon you can use it again
- Whether the price covers travel
- Aftercare advice
- How changes to the job are handled
Nearby places to Cornforth
Also in Cornforth
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Honest limits
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Do not let dyes or oils sit on the finish
- Do not leave a chip unrepaired
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Should you replace it?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Cornforth
- Colours mixed by hand to suit your surface
- Everything repaired in place
- Rooms protected and left tidy
- One visit for most repairs
Read our full price list or bath cost comparison.
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- Unusual colours or finishes
- Access to the area
- The type of damage
- How many items we do on one visit
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- A photo taken from further back
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- The material, if you know it
To get a price, send two or three photos using our quote form or ring us. We’ll say immediately whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
