Leeds · England
Bath re-enamelling & resurfacing in Micklethwaite, Leeds
Damaged bath in Micklethwaite? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
Bath re-enamelling in Micklethwaite without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with a bath that stays dull however much you clean it and a period or roll-top bath worth keeping, we can usually put it right.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Where
- Micklethwaite (LS22, LS23)
- County
- Leeds
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Why us?
- Colours mixed by hand to suit your surface
- Usually one visit, start to finish
- Honest advice, even when it means no job
- Same prices wherever you are
Take a look at our prices page and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
About Micklethwaite
Micklethwaite is about 1 mile south of Wetherby, in Leeds. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Micklethwaite is one of 198 towns and villages in Leeds we cover. Our jobs stretch from Micklethwaite to Leeds (about 10 miles away).
Postcode districts we cover here: LS22 and LS23. Whether you live on Scott Lane, Ceres Road and Linton Road or anywhere nearby, we can come to you. Main roads around Micklethwaite include the A661, which makes travel easy. We also cover the places around Micklethwaite: Hallfield (1 mile north-east), Wetherby (1 mile north), Ainsty (1 mile north), Kirk Deighton (2 miles north) and Ingmanthorpe (2 miles north-east). Within a short drive, we also cover Leeds (10 miles south-west), Morley (15 miles south-west), Pudsey (14 miles south-west), Rothwell (12 miles south), Beeston (12 miles south-west) and Farsley (14 miles south-west).
Local landmarks in Micklethwaite
We visit homes around Wetherby High School, George & Dragon pub and Crossley Street Primary School, among other places. A little further out are Wetherby Castle (within half a mile north-west). Not far away are Norwood Bottoms.
Keeping it looking good
Nothing complicated is needed:
- Store bottles off the bath
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Prices and what affects them
Prices start from £350. You will know the full cost before booking. We take into account:
- How many items we do on one visit
- Access to the area
- The material and finish
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- A close-up of the damage, in focus
- What it’s made of, if you know
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Also near Micklethwaite
More services for Micklethwaite
Landlord and trade work in Micklethwaite
If you manage property in Micklethwaite, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Your questions about bath re-enamelling in Micklethwaite
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Are there extra charges for Micklethwaite?
No. Our quotes include travel, and we charge the same wherever you are.
Do you cover the whole of Leeds?
We cover the whole UK, including Micklethwaite and the rest of Leeds. Just include your postcode and we will confirm dates.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When to call us in Micklethwaite
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Common reasons people in Micklethwaite contact us are:
- Several chips and rust patches
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
What to look for in a quote
- What protection goes down before work starts
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
- How to look after the finish
How the visit works
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes most of the day. The room is left tidy and you will know when it can be used.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the following day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
