Slough · England

Bath Re-enamelling in Middlegreen

Fixed-price bath re-enamelling in Middlegreen and the surrounding area, done in a single visit in most cases.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Middlegreen

Bath re-enamelling at your home in Middlegreen

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people contact us are staining under the taps and around the waste and a coating lifting around the plughole.

You get a one-year guarantee, the same in Middlegreen as everywhere else we work.

Technician in a mask working on a freestanding roll-top bath
Location
Middlegreen (SL3)
County
Slough
Warranty
One year on every repair
Quotes
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Aftercare tips

Aftercare is simple:

  • Stick to gentle, non-abrasive cleaners
  • Do not use the bath until it has fully cured
  • Avoid suction-cup mats
  • Do not leave bottles, razors or sponges standing on the surface

Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.

If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

Do you need bath re-enamelling in Middlegreen?

Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.

Common reasons people in Middlegreen contact us include:

  • Enamel that is lost its shine and feels rough
  • Chips and rust in more than one place
  • Stains that will not shift
  • An old resurfacing that is failing

Comparing quotes

  • Whether a trained technician does the job
  • Whether the price covers travel
  • Whether the colour is mixed to match
  • How the room is protected while they work

Our hiring checklist

Repair or replace in Middlegreen?

Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Why us?

  • Everything repaired in place
  • Same prices wherever you are
  • Work done at your home or business
  • Generally one visit, start to finish

See our prices page or bath cost comparison.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

How the visit works

We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes the best part of a day. We leave the room clean and you will know when it can be used.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Tell us about parking, stairs or access
  • Keep pets and children out of the room while we work

Ask for a price

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.

Send pictures for a quote

Advice

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Your questions about bath re-enamelling in Middlegreen

Can you repair several things at once?

Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.

Is there a smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

How much does bath re-enamelling cost in Middlegreen?

Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Will there be a smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

What we cannot put right

In fairness, there are a few things a repair won’t fix:

  • A cast iron or steel bath that is cracked right through
  • A poorly supported acrylic bath, until it’s firmed up
  • Steel that has corroded right through

Send us pictures and we will tell you honestly before you book.

Surfaces we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths

Landlord and trade work in Middlegreen

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

Our work in Middlegreen

Middlegreen is about 2 miles east of Slough, in Slough. Wherever you are in the SL3 postcode area, we carry out the work at your property. We work in all 31 towns and villages in Slough. We work right across the region, from Middlegreen to London (20 miles away).

Jobs in SL3 work the same way as everywhere else we cover. Streets in the area include Laurel Avenue, St Mary's Road and Maryside, and we cover them all. We also travel to Langley (1 mile south-east), George Green (1 mile north), Shreding Green (1 mile north-east), Upton (2 miles west) and Wexham Court (2 miles north-west). We also work in nearby towns such as Cippenham (4 miles west), Britwell (3 miles north-west), Burnham (5 miles west), Stoke Poges (3 miles north-west), Huntercombe (4 miles west) and Farnham Common (4 miles north-west).

Near you in Middlegreen

Our customers here include homes close to Ditton Park, Langley Academy and Upton Court Grammar School and the streets around them. Other local landmarks include St Mary the Virgin Church (less than half a mile south), The Langley Academy Primary (under half a mile south) and The Chestnuts pub (within half a mile south). The nearest railway station is Langley station, about 0.7 miles east of the centre. Nearby you will also find Museum of Eton Life (2.6 miles south-west) and Upton Hospital (1.6 miles west). The countryside around Middlegreen includes Stoke Common.

  • Local facilities include Municipal Borough of Slough (1.6 miles west)
Map of Middlegreen © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.