Slough · England
Bath Re-enamelling for George Green homes
Damaged bath in George Green? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Wear marks under the taps
About our bath re-enamelling in George Green
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We are frequently asked to fix brown or grey marks that don’t clean off and a coating lifting around the plughole, on pressed steel baths, Victorian roll-tops and cast iron baths.
Every repair is covered by a one-year guarantee, wherever you are in Slough.
- Area
- George Green (SL3)
- Area hub
- Slough
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in George Green
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Look out for these signs:
- Lots of chips and rust spots
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
Before you book anyone
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
How it works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say immediately whether it can be repaired.
Related advice
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- What the surface is made of
- Doing more than one item at once
- The type of damage
- The size and number of damaged areas
Our prices are the same across the UK, with no extra for George Green. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
George Green questions
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Covering George Green
George Green is about 2 miles east of Slough, in Slough. From the centre of George Green to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. George Green is one of 31 towns and villages in Slough we cover. Our jobs stretch from George Green to London (about 20 miles away).
Every address in SL3 is covered. From Thorn Drive, August End and Blinco Lane or a nearby road, a technician can come to you. We also travel to Middlegreen (1 mile south), Wexham Court (1 mile north-west), Langley (1 mile south), Shreding Green (1 mile east) and Wexham Street (2 miles north-west). Further out, we also cover Cippenham (4 miles west), Chalvey (3 miles south-west), Britwell (3 miles west), Burnham (4 miles west), Datchet (3 miles south) and Huntercombe (4 miles west).
Near you in George Green
Typical jobs here are in homes near Wexham Court Primary School, Upton Court Grammar School and Wexham School and the streets around them. Also close by are The George Public House (less than half a mile west) and Parish Church of St Mary (0.6 miles west). The closest station to George Green is Langley station, about 1.2 miles south-east of the centre. Well-known places in the area include Municipal Borough of Slough (1.7 miles south-west) and Windsor Castle (3.3 miles south-west). The countryside around George Green includes Stoke Common.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What a repair can’t fix
We will always be straight with you, so here’s what a repair will not do:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in George Green
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
For landlords and businesses
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Keeping it looking good
Once the work has cured, treat it gently:
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
- Get any chip repaired quickly
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Places near George Green
Other services in George Green
About our accreditations · Every repair comes with a one-year guarantee.
