Staffordshire · England
Bath re-enamelling & resurfacing in Mile Oak, Staffordshire
Problem with your bath in Mile Oak? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Mile Oak
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We are often asked to fix wear marks under the taps and an old resurfacing that’s failing, across cast iron baths, acrylic baths and basins & shower trays.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Mile Oak (B78)
- Region
- Staffordshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Mile Oak
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
It’s worth getting a quote if you see:
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
What your quote should include
- How to care for the finish
- What the guarantee covers, and for how long
- When it can be used again
- A fixed price, and whether VAT is included
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair cannot fix:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Mile Oak
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Mile Oak questions
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that is in the quote.
How long is the bath unusable?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- The type of damage
- Unusual colours or finishes
- The size and number of damaged areas
- Doing more than one item at once
We charge the same wherever you are, with no extra for Mile Oak. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
You can take the photos on your phone. Just ensure we can see:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
Upload photos of the damage and a wider shot of the entire item, and tell us you are in Mile Oak, and we’ll come back with a fixed quote.
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
What you get with us
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page and bath cost comparison.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Rinse off hair dye, oils and bath bombs right away
- Never use suction bath mats
- Do not leave a chip unrepaired
- Repair dripping taps early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About Mile Oak
Mile Oak is about 2 miles west of Tamworth, in Staffordshire. Whether you’re in the middle of Mile Oak or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Mile Oak is one of 512 places in Staffordshire where we work. Our nearest city page is Birmingham, about 12 miles away.
Here we cover the B78 postcode area. Jobs here include addresses on Hints Road, Sutton Road and Allton Avenue and the roads around them. Being close to the A453, Mile Oak is simple for us to get to. Close by, we cover The Bodnetts (1 mile north-west), Fazeley (1 mile east), Hints (1 mile west), Bitterscote (1 mile north-east) and Hopwas (2 miles north). We also work in nearby towns such as Burton upon Trent (13 miles north), Cannock (13 miles north-west), Lichfield (6 miles north-west), Rugeley (13 miles north-west), Burntwood (9 miles north-west) and Hednesford (13 miles north-west).
Around Mile Oak
In Mile Oak, that means homes near St. Barnabas Church, Landau Forte Academy QEMS and Longwood Primary School, among other places. For rail, the closest station is Tamworth station, roughly 2.2 miles north-east. A little further out are Ankerside Shopping Centre (1.8 miles north-east) and The Bryans Museum (0.9 miles south-east). Not far away are Middleton Lakes RSPB reserve.
The process
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the next day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Open a window if you can
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
Places near Mile Oak
What else we do in Mile Oak
About our accreditations · Every repair comes with a one-year guarantee.
