Staffordshire · England
Bath re-enamelling & resurfacing in Hednesford, Staffordshire
Bath re-enamelling in Hednesford without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- Thin, worn enamel in places
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Bath re-enamelling in Hednesford without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for thin, worn enamel in places and a peeling or bubbling previous coating, across acrylic baths, Victorian roll-tops and pressed steel baths.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Hednesford (WS12, WS11)
- County
- Staffordshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Hednesford. The price comes down to:
- What the surface is made of
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- Something in shot to show the size
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Hednesford as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Our work in Hednesford
Hednesford is about 1 mile north-east of Cannock, in Staffordshire. Our repair technicians come to homes and businesses in Hednesford and the surrounding area, so you do not need to take anything anywhere. We work in all 512 towns and villages in Staffordshire. Our jobs stretch from Hednesford to Birmingham (17 miles away).
Our technicians cover all of WS12 and WS11 and the streets around it. From Gray Road, Belt Road and Wood Lane or anywhere nearby, a technician can come to you. Close by, we cover Pye Green (1 mile north-west), Chadsmoor (1 mile south-west), Brindley Heath (1 mile north), Huntington (2 miles west) and Bednall Head (4 miles north-west). We also work in nearby towns such as Stafford (8 miles north-west), Tamworth (15 miles south-east), Lichfield (8 miles east), Rugeley (4 miles north-east), Burntwood (4 miles south-east) and Stone (14 miles north-west).
Near you in Hednesford
Around Hednesford, we work in homes near The Queens Arms, Hednesford Park and Staffordshire University Academy and the streets around them. Other local landmarks include Kingsmead School (0.7 miles south), Our Lady of Lourdes Church (under half a mile south) and West Hill Primary School (under half a mile west). Hednesford has its own railway station: Hednesford station. Further afield, we also cover the area around Cannock Castle Ring (2.7 miles east) and Cannock Chase Hospital (1.8 miles south-west). Green spaces nearby include George's Hayes.
Places near Hednesford
Other services in Hednesford
How the visit works
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Make sure the room can be ventilated
- Let the surface dry out before the visit
- Let us know which floor the room is on
Ask for a price
Email us pictures of the damage and one of the whole item, with your WS12 postcode, and we will come back with a fixed quote.
Related advice
What a repair cannot fix
It helps to know what we cannot do:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Do you need bath re-enamelling in Hednesford?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Contact us if you’ve noticed:
- A roll-top that is seen better days
- Stains that will not shift
- A coating lifting around the plughole
- Wear marks under the taps
Before booking anyone
- The length of the guarantee and what it covers
- How your room will be protected
- What happens if the damage is worse than the photos show
- Who will actually do the work
Repairing versus replacing in Hednesford
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Straight answers about what a repair can do
- Nothing taken out or refitted
- One-year guarantee on every repair
- No extra charge for your area
Read our prices page and bath cost comparison.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Hednesford: your questions answered
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
What happens after I send pictures?
We review the photos and send a fixed quote with dates.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
How long is the bath unusable?
Usually one day, with the bath ready the following day. Deeply pitted baths may need a second day.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you repair something that is been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
About our accreditations · Every repair comes with a one-year guarantee.
