Kent · England
Bath Re-enamelling for Milebush homes
Bath re-enamelling across Milebush and nearby, usually in one visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
FAQs for Milebush
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
What happens next?
We come back with a fixed price, normally with dates to choose from. You’re under no obligation.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you quote from photos?
Nearly always. If photos don’t show enough, we will ask for another angle.
Bath re-enamelling at your home in Milebush
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for lots of chips and rust spots and wear marks under the taps, in cast iron baths, pressed steel baths and Victorian roll-tops.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Milebush (TN12)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
How to care for the repair
Simple care helps the repair last. We recommend:
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Do not use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we’re called out for in Milebush
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
Questions to ask before you book
- Whether they match the colour on site
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
- What prep work is covered
Places near Milebush
What else we do in Milebush
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Repair or replace: which is better?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
What you get with us
- Rooms protected and left tidy
- One-year guarantee on every repair
- A fixed quote before booking
- We’ll tell you if it’s not worth repairing
Read our pricing or guide to resurfacing and replacement costs.
Milebush and nearby
Milebush is about 6 miles south of Maidstone, in Kent. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Milebush is one of 922 places in Kent where we work. Our nearest city page is London, about 34 miles away.
Our technicians cover all of the TN12 postcode area and the streets around it. Local streets include Maidstone Road and Milebush Lane. Neighbouring places we cover include St Ann's Green (1 mile east), Underling Green (1 mile north-east), Wanshurst Green (1 mile south-east), Cross-at-Hand (2 miles east) and Marden Thorn (2 miles south). Within a short drive, we also cover Maidstone (6 miles north), Sittingbourne (15 miles north-east), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (11 miles west), Tonbridge (10 miles west) and Kings Hill (7 miles north-west).
What’s near Milebush
Around Milebush, we work in homes near St Michael and All Angels Church and the streets around them. Milebush’s nearest station is Marden station, roughly 1.1 miles south-west of the centre. Nearby you’ll also find Sutton Valence Castle (4.2 miles north-east) and Oakwood Hospital (5.7 miles north).
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- Whether old repairs or coatings need taking off
- The material and finish
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
You can normally get a fixed price without us visiting. To help us price it:
- A wider photo showing the entire bath
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
The process
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a full day in most cases. We leave the room clean.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
