Kent · England
Bath re-enamelling & resurfacing in Underling Green, Kent
Full bath re-enamelling and resurfacing at your home in Underling Green, with a one-year guarantee on every repair.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots

Bath re-enamelling in Underling Green, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with a coating lifting around the plughole and wear marks under the taps, we can help, on cast iron baths, acrylic baths and pressed steel baths alike.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

- Where
- Underling Green (TN12)
- Region
- Kent
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Underling Green
Underling Green is about 5 miles south of Maidstone, in Kent. Wherever you are in the TN12 postcode area, we carry out the work at your property. We work in 922 places across Kent, from the larger towns to small villages. Our nearest city page is London, about 34 miles away.
Every address in TN12 is within our area. Neighbouring places we cover include Milebush (1 mile south-west), St Ann's Green (1 mile south), Wanshurst Green (1 mile south), Cross-at-Hand (1 mile east) and Rabbit's Cross (2 miles east). Further out, we also cover Maidstone (5 miles north), Sittingbourne (14 miles north-east), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (11 miles west), Tonbridge (10 miles west) and Kings Hill (7 miles north-west).
Around Underling Green
For rail, the closest station is Marden station, roughly 1.5 miles south-west of the centre. A little further out are Oakwood Hospital (5.5 miles north) and South East Romany Museum (1.3 miles south).
Common problems we fix in Underling Green
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
You may need us if you’ve spotted any of these:
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
What to look for in a quote
- How the colour is matched
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
FAQs for Underling Green
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Do you come to Underling Green?
Yes. We work across the UK and come to Underling Green. Send us pictures for a fixed quote, or call 0345 017 0787.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How long will the bath be out of use?
Normally one day, with the bath ready the following day. A badly pitted bath can need a second day.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Nearby places to Underling Green
Other services in Underling Green
What affects the price in Underling Green
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- How many items we do on one visit
- What kind of damage it is
- The material
- How hard the colour is to match
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Aftercare tips
Simple care helps the repair last. Our advice:
- Fix dripping taps quickly
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Landlords, agents and businesses in Underling Green
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.

