Shropshire · England
Bath re-enamelling & resurfacing in Mill Green, Shropshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Mill Green. Free, fixed quotes from your photos.
- Resurfacing from £350
- Stains that won’t shift
- A coloured bath you want in white
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your photos. What matters most is:
- Doing more than one item at once
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Your postcode, so we can check dates
- A photo taken from further back
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say straight away whether it can be repaired.
Bath re-enamelling at your home in Mill Green
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean, we can help, on cast iron baths, Victorian roll-tops and acrylic baths alike.
We stand behind the work with a one-year guarantee.
- Area
- Mill Green (TF9)
- Area hub
- Shropshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Towns and villages near Mill Green
What else we do in Mill Green
The process
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Let us know if it has been repaired before
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Related advice
Repair or replace in Mill Green?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why us?
- One-year guarantee on every repair
- Most jobs done in one visit
- No extra charge for your area
- Nothing taken out or refitted
See our prices page and guide to resurfacing and replacement costs.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Don’t use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- Dry the bath after use to stop limescale
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What we are called out for in Mill Green
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Signs it’s time to call us include:
- Several chips and rust patches
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
What your quote should include
- What prep work is covered
- How changes to the job are handled
- What protection goes down before work starts
- Aftercare advice
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Mill Green and nearby
Mill Green is about 4 miles south of Market Drayton, in Shropshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Mill Green is one of 433 places in Shropshire where we work. You can also see our page for Birmingham, about 36 miles away.
Our visits in TF9 work the same way as everywhere else we cover. Nearby, we also work in High Heath (1 mile south-east), Woodlane (1 mile south-east), Hinstock (1 mile south-east), Child's Ercall (2 miles south-west) and Sutton upon Tern (2 miles north). Larger places within reach include Shrewsbury (15 miles south-west), Madeley (15 miles south), Market Drayton (4 miles north), Coleham (15 miles south-west), Kingsland (15 miles south-west) and Whitchurch (12 miles north-west).
Near you in Mill Green
Typical jobs here are in homes near Wistanwick United Reformed Church and Hinstock Primary School, among other places. Nearby you’ll also find Cheswardine Castle (2.6 miles north-east) and Market Drayton Museum And Resource Centre (3.8 miles north). Green spaces nearby include Quarry Wood.
What we cannot put right
A repair is not right for every job, including:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Questions from Mill Green
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
About our accreditations · Every repair comes with a one-year guarantee.
