Shropshire · England
Bath re-enamelling & resurfacing in Coleham, Shropshire
Our technicians come to Coleham for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Bath re-enamelling at your home in Coleham
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. We are often asked to fix a coating lifting around the plughole and brown or grey marks that don’t clean off, across basins & shower trays, acrylic baths and Victorian roll-tops.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Location
- Coleham (SY1, SY3, SY2)
- Area hub
- Shropshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Coleham and nearby
Coleham is about 1 mile south of Shrewsbury, in Shropshire. We visit customers in Coleham and nearby villages, so nothing has to leave your home. We cover 433 places in Shropshire, from the larger towns to small villages. You can also see our page for Birmingham, about 39 miles away.
Our visits in SY1, SY3 and SY2 work the same way as everywhere else we cover. Jobs here include addresses on Vane Road, Mill Road and Grope Lane. Coleham sits on or near the A5191, so getting to you is simple. Nearby, we also work in Belle Vue (1 mile south), Kingsland (1 mile north-west), Shrewsbury (1 mile north), Frankwell (1 mile north-west) and Bagley (1 mile north). We also work in nearby towns such as Madeley (13 miles east), Wem (11 miles north), Broseley (13 miles south-east), Ellesmere (15 miles north-west), Harlescott (3 miles north-east) and Church Stretton (12 miles south). As one of the bigger places in Shropshire, Coleham is somewhere we visit often.
Around Coleham
Our clients here include homes close to Wakeman School, Barnabas Community Church and Coleham Primary School. You’ll also find The Coleham Tap (within half a mile west) and Shrewsbury High School (less than half a mile west). For rail, the closest station is Shrewsbury station, about 0.6 miles north of the centre. A little further out are Darwin Shopping Centre (0.5 miles north-west) and Shrewsbury Castle (0.5 miles north). For a walk, there is Haughmond Hill and Bomere Pool.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- A fixed quote before you book
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
- Colour-matched on site
Read our pricing and guide to resurfacing and replacement costs.
Other services in Coleham
How to look after the repair
After the repair has cured, a few habits help it last:
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Coleham. The price reflects:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How many items we do on one visit
- Unusual colours or finishes
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
Most quotes are done from pictures alone. To help us price it:
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- Whether it’s been repaired or coated before
To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Coleham: your questions answered
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you cover the whole of Shropshire?
All of Shropshire, and the rest of the UK. There is no extra charge for travel.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
How do I get a price for bath re-enamelling in Coleham?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Shropshire.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
How to get a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
When we’d advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
