West Berkshire · England
Bath re-enamelling & resurfacing in Mill Green, West Berkshire
Fixed-price bath re-enamelling in Mill Green and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Same prices wherever you are
- Most jobs done in one visit
- Rooms protected and left tidy
- Straight answers about what a repair can do
See our prices page and bath cost comparison.
Bath re-enamelling in Mill Green without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our repair technicians work on basins & shower trays, cast iron baths and acrylic baths, and people most often call us about thin, worn enamel in places and an outdated colour you’d like to change.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Location
- Mill Green (RG19)
- County
- West Berkshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Mill Green. The price depends on:
- Doing more than one item at once
- The type of damage
- How hard the colour is to match
- The material
Our prices are the same across the UK, with no extra for Mill Green. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- Where you are, by postcode
- Something in shot to show the size
- Any earlier repairs or coatings
- What it’s made of, if you know
Upload pictures of the damage and a wider shot of the whole item, and tell us you are in Mill Green, and we’ll come back with a fixed quote.
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Keep suction mats out of the bath
- Respect the curing time we give you
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Mill Green questions
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What we are called out for in Mill Green
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
It’s worth getting a quote if you see:
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- An old resurfacing that is failing
- An outdated colour you’d like to change
Before booking anyone
- How soon you can use it again
- Who will actually do the work
- What preparation is included
- What protection goes down before work starts
Where we work around Mill Green
Mill Green is about 3 miles south of Thatcham, in West Berkshire. Across the RG19 area, we carry out the work at your property. Our repair technicians cover 155 places across West Berkshire, from the larger towns to small villages. Our jobs stretch from Mill Green to London (about 50 miles away).
Postcode districts we cover here: RG19. Other places close to Mill Green include Headley (1 mile west), Goose Hill (1 mile east), Plastow Green (1 mile south), Crookham (1 mile north-east) and Heads Hill (1 mile north-west). Larger places within reach include Newbury (4 miles north-west), Thatcham (3 miles north), Burghfield Common (8 miles east), Speenhamland (5 miles north-west), Hungerford (12 miles west) and Spencers Wood (12 miles east).
Around Mill Green
Our customers here include homes close to The Travellers Friend pub, New Greenham Park and Church of St Peter. The nearest railway station is Thatcham station, about 2 miles north. Well-known places in the area include West Berkshire Community Hospital (3.6 miles north-west) and Old Chapel Textile Centre (1.7 miles west). The countryside around Mill Green includes Ladle Hill and Thatcham Reed Beds.
Towns and villages near Mill Green
What else we do in Mill Green
When we would advise against a repair
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Steel that has corroded right through
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
