Oxfordshire · England
Bath re-enamelling & resurfacing in Milton, Oxfordshire
Damaged bath in Milton? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
Bath re-enamelling in Milton, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s brown or grey marks that don’t clean off and thin, worn enamel in places, we can help, on Victorian roll-tops, cast iron baths and basins & shower trays alike.
All our work comes with a one-year guarantee, wherever you are in Oxfordshire.
- Area
- Milton (OX15)
- County
- Oxfordshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Milton?
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
It’s worth getting a quote if you see:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- A coloured bath you want in white
- Lots of chips and rust spots
What to look for in a quote
- The length of the guarantee and what it covers
- What aftercare is recommended
- What preparation is included
- How changes to the job are handled
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Milton and nearby
Milton is about 4 miles south of Banbury, in Oxfordshire. We visit clients in Milton and the surrounding area, so you do not need to take anything anywhere. We work in 443 places across Oxfordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 39 miles away.
All of OX15 is within our area. Nearby, we also work in Adderbury (1 mile east), Bloxham (1 mile west), Twyford (2 miles north-east), Bodicote (2 miles north-east) and Broughton (3 miles north-west). Further out, we also cover Banbury (4 miles north), Bicester (11 miles south-east), Kidlington (13 miles south), Bure Park (11 miles south-east), Chipping Norton (10 miles south-west) and Grimsbury (4 miles north).
Landmarks near Milton
Our customers here include homes close to The Warriner School, The Marlstone Tavern and Church of St John the Evangelist. The closest station to Milton is Kings Sutton station, roughly 2.8 miles east of the centre. Nearby you’ll also find Deddington Castle (2.4 miles south-east) and Horton General Hospital (3 miles north). Not far away are Crouch Hill.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Milton. What changes the price is:
- The material
- Whether we combine several jobs
- The size and number of damaged areas
- Access to the area
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Where you are, by postcode
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
FAQs for Milton
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
How much does bath re-enamelling cost in Milton?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
More services for Milton
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
What you get with us
- A fixed quote before you book
- Same prices wherever you are
- Normally one visit, start to finish
- Straight answers about what a repair can do
Read our prices page or resurfacing vs replacement cost guide.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
