Oxfordshire · England
Bath re-enamelling & resurfacing in Milton, Oxfordshire
Our technicians come to Milton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
How to look after the repair
Simple care helps the repair last. Our advice:
- Rinse off hair dye, oils and bath bombs immediately
- Have chips seen to early
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Bath re-enamelling at your home in Milton
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the following day. Our repair technicians work on acrylic baths, pressed steel baths and cast iron baths, and people most often call us about an old resurfacing that’s failing and an original cast iron bath that needs restoring.
Big or small, it’s backed by a one-year guarantee.
- Location
- Milton (OX14, OX11)
- Area hub
- Oxfordshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Milton
Also in Milton
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Milton. The price reflects:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Access to the area
- What the surface is made of
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- One picture of the whole bath
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Milton and the surrounding area
Milton is about 2 miles north-west of Didcot, in Oxfordshire. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Milton is one of 443 towns and villages in Oxfordshire where we work. Our nearest city page is London, about 52 miles away.
Postcode districts we cover here: OX14 and OX11. Whether you live on High Street, School Lane and Willow Lane or anywhere nearby, a technician can come to you. We also travel to Sutton Courtenay (1 mile north-east), Great Western Park (2 miles south-east), Caldecott (2 miles north), Culham (2 miles north-east) and Didcot (2 miles south-east). Larger places within reach include Oxford (9 miles north), Abingdon-on-Thames (4 miles north), Witney (14 miles north-west), Wantage (6 miles south-west), Grove (6 miles west) and Faringdon (13 miles west).
Around Milton
Our clients here include homes close to Sutton Courtenay Church of England Primary School, Plum Pudding pub and Church of St Blaise. The nearest railway station is Appleford station, about 2.5 miles east of the centre. A little further out are FitzHarris Castle (3.4 miles north) and Abingdon Community Hospital (3 miles north). For a walk, there’s Mowbray Fields and Wittenham Clumps.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Open a window if you can
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Repairing versus replacing in Milton
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Prices start from £350. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Colour mixed on the day to match
- Repair technicians who travel to you, UK-wide
- We will tell you if it’s not worth repairing
- Every repair guaranteed for a year
Read our pricing and bath cost comparison.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Common questions in Milton
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do you cover the whole of Oxfordshire?
We work UK-wide, and that includes Milton. Our prices are the same everywhere.
About our accreditations · Every repair comes with a one-year guarantee.
