Gloucestershire · England
Bath Re-enamelling in Mitton
Full bath re-enamelling and resurfacing at your home in Mitton, with a one-year guarantee on every repair.
- Resurfacing from £350
- Worn patches where water runs and sits
- An old resurfacing that’s failing
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Don’t use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
- Rinse off hair dye, oils and bath bombs straight away
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Bath re-enamelling in Mitton without replacing anything
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Whether it’s worn patches where water runs and sits and an original cast iron bath that needs restoring, we can typically put it right.
Every repair is covered by our one-year guarantee.
- Where
- Mitton (GL20)
- Region
- Gloucestershire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What a repair can’t fix
In fairness, some problems need a different fix:
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About Mitton
Mitton is about 1 mile north of Tewkesbury, in Gloucestershire. Whether you are in the middle of Mitton or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in 470 places across Gloucestershire. Our nearest city page is Birmingham, about 34 miles away.
Every address in GL20 is covered. We regularly work on streets such as Bredon Road, Hawser Road and Carrant Road and the roads around them. With the A438 close by, Mitton is simple for us to get to. We also travel to Bredon's Hardwick (1 mile north-east), Northway (1 mile east), Church End (2 miles north), Bushley (2 miles west) and Twyning (2 miles north). We also work in nearby towns such as Cheltenham (8 miles south), Gloucester (11 miles south), St Paul's (8 miles south-east), Lansdown (8 miles south), Bishop's Cleeve (5 miles south-east) and Fairview (8 miles south-east).
Around Mitton
Locally, our jobs take us to homes close to Mythe Railway Nature Reserve, Church of Holy Trinity and Tewkesbury Academy and the streets around them. Nearby too are Mitton Manor Primary School (less than half a mile south-east) and The White Bear pub (within half a mile south-west). For rail, the closest station is Ashchurch for Tewkesbury station, about 1.6 miles east of the centre. Well-known places in the area include Tewkesbury Heritage & Visitor Centre (0.8 miles south-west). Green spaces nearby include Beckford Nature Reserve and Kemerton Lake.
What happens on the day
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow the best part of a day. Before we go, we’ll explain when it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Landlords, agents and businesses in Mitton
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why Mitton clients choose us
- One price list for the whole UK
- Colours mixed by hand to suit your surface
- No need to remove anything
- A year’s guarantee on all work
Read our pricing and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- How many items we do on one visit
- How many areas need work
- The material
- Unusual colours or finishes
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
Two or three clear photos are normally enough. It helps if you send:
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- What it’s made of, if you know
To get a price, send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
What else we do in Mitton
FAQs for Mitton
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
