Gloucestershire · England

Bath re-enamelling & resurfacing in Bushley, Gloucestershire

Bath re-enamelling across Bushley and nearby, done in a single visit in most cases.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Bushley

The process

We work cleanly and quietly. Protection goes down first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to look after it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Preparing for the visit

  • Ensure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area
  • Let us know about parking or access

Ask for a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.

Get a fixed price

Related advice

Bath re-enamelling in Bushley, done in place

If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Our repair technicians work on basins & shower trays, acrylic baths and cast iron baths, and the jobs we see most are lots of chips and rust spots and an outdated colour you’d like to change.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Location
Bushley (GL20)
Area hub
Gloucestershire
Guarantee
One year on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Repairing versus replacing in Bushley

If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Bushley

  • CHAS and Constructionline accredited
  • Colour-matched on site
  • Honest advice, even when it means no job
  • No extra charge for your area

Read our prices page or resurfacing vs replacement cost guide.

What your bath is made of matters

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Common questions in Bushley

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.

How do I get a price for bath re-enamelling in Bushley?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can you fix a peeling bath coating?

Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

What happens next?

You’ll get a fixed quote back, plus dates. There’s no obligation to book.

Looking after it afterwards

So the finish stays in good condition:

  • Clean with a soft cloth and mild detergent
  • Get any chip repaired quickly
  • Do not let dyes or oils sit on the finish
  • Store bottles off the bath

Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.

Do you need bath re-enamelling in Bushley?

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

The most common problems we are called about are:

  • Several chips and rust patches
  • A roll-top that’s seen better days
  • A bath that stays dull however much you clean it
  • A peeling or bubbling previous coating

Comparing quotes

  • What protection goes down before work starts
  • What aftercare is recommended
  • Whether there are any call-out or travel charges
  • How long it needs to cure

Choosing a repair company

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

About Bushley

Bushley is about 2 miles north-west of Tewkesbury, in Gloucestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover all 470 towns and villages in Gloucestershire, from the larger towns to small villages. Our jobs stretch from Bushley to Birmingham (34 miles away).

We cover every part of the GL20 postcode area and the streets around it. Local streets include Crofts Field and Stokes Road, and we cover them all. We also cover the places around Bushley: Puckrup (1 mile north-east), Church End (2 miles north-east), Mitton (2 miles east), Ripple (2 miles north) and Uckinghall (2 miles north). Within a short drive, we also cover Cheltenham (9 miles south-east), Gloucester (11 miles south), St Paul's (9 miles south-east), Lansdown (9 miles south-east), Bishop's Cleeve (7 miles south-east) and Fairview (9 miles south-east).

Local landmarks in Bushley

Typical jobs here are in homes near Tewkesbury Academy, Bredon School and Mythe Railway Nature Reserve, among other places. The closest station to Bushley is Ashchurch for Tewkesbury station, about 3.3 miles east. Further afield, we also cover the area around John Moore Museum (1.6 miles south-east). Open spaces near Bushley include Kemerton Lake.

Map of Bushley © OpenStreetMap contributors

Prices and what affects them

Resurfacing from £350. We price every job individually, from your photos. The main factors are:

  • Unusual colours or finishes
  • How easy the damage is to reach
  • Previous DIY repairs that have to come out
  • How many items we do on one visit

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.

Quotes from your photos

Most quotes are done from pictures alone. To make it quick:

  • A wider photo showing the whole bath
  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • Any earlier repairs or coatings

If you are in Bushley and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.