Hampshire · England
Bath re-enamelling & resurfacing in Mockbeggar, Hampshire
Full bath re-enamelling and resurfacing in Mockbeggar, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- An outdated colour you’d like to change
About our bath re-enamelling in Mockbeggar
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you’re dealing with a period or roll-top bath worth keeping and several chips and rust patches, we can help, on cast iron baths, pressed steel baths and acrylic baths alike.
All our work comes with our one-year guarantee, wherever you are in Hampshire.
- Location
- Mockbeggar (BH24)
- County
- Hampshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Mockbeggar?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
- Every repair guaranteed for a year
Take a look at our full price list and resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Mockbeggar
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Most people contact us when they notice something like this:
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- A dull, rough surface that won’t come clean
- Brown or grey marks that don’t clean off
Before booking anyone
- What prep work is covered
- What happens if they find more damage
- Who will actually do the work
- Whether they match the colour on site
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Mockbeggar: your questions answered
Can you quote from photos?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
When a repair is not the answer
Some jobs aren’t right for a repair, including:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Mockbeggar
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
What affects the price in Mockbeggar
Prices start from £350. There’s no area surcharge for Mockbeggar. The price reflects:
- Any earlier repairs that need removing first
- How hard the colour is to match
- Access to the area
- How many areas need work
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Getting a price from pictures
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- Any details about the material
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Mockbeggar and the surrounding area
Mockbeggar is about 5 miles east of Verwood, in Hampshire. Across the BH24 area, we carry out the work at your property. We work in 683 places across Hampshire, from the larger towns to small villages.
Our technicians cover all of BH24 and the streets around it. Streets in the area include Gorley Road and New Road. Neighbouring places we cover include South Gorley (1 mile north), Ibsley (1 mile west), Rockford (1 mile south), Harbridge (1 mile west) and Ellingham (1 mile south-west). Within a short drive, we also cover Totton (12 miles east), Lymington (13 miles south-east), Romsey (15 miles north-east), New Milton (10 miles south-east), Ringwood (3 miles south) and Barton on Sea (11 miles south-east).
Around Mockbeggar
We visit homes around Church of St Martins and The Old Beams Inn and the streets around them. Further afield, we also cover the area around Godshill Castle Hill (3.9 miles north) and Fordingbridge Doll Museum (2.8 miles north). The countryside around Mockbeggar includes Linbrook Lake and Blashford Lakes.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
More services for Mockbeggar
How it works
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take the best part of a day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Ask for a price
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
