Kent · England

Bath Re-enamelling for Molash homes

Damaged bath in Molash? We repair it in place, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Molash

Bath re-enamelling in Molash without replacing anything

The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. Our repair technicians work on cast iron baths, Victorian roll-tops and acrylic baths, and people most frequently call us about brown or grey marks that don’t clean off and thin, worn enamel in places.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Molash (CT4)
County
Kent
Guarantee
12 months on all our work
Price
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Do you need bath re-enamelling in Molash?

Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

Common reasons people in Molash contact us are:

  • A period or roll-top bath worth keeping
  • A coating lifting around the plughole
  • A bath that stays dull however much you clean it
  • Lots of chips and rust spots

What your quote should include

  • When it can be used again
  • Who will actually do the work
  • How to care for the finish
  • Whether the price covers travel

10 questions to ask before you book

Our work in Molash

Molash is about 6 miles south of Faversham, in Kent. Customers in Molash get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Molash is one of 922 places in Kent we cover. You can also see our page for London, about 47 miles away.

Jobs in CT4 work the same way as everywhere else we cover. Whether you live on The Street, Pound Lane and Church Lane or a nearby road, we can come to you. We also travel to Shottenden (2 miles north-east), Bilting (2 miles south-east), Perrywood (3 miles north), Mountain Street (3 miles east) and Godmersham (3 miles east). We also work in nearby towns such as Ashford (6 miles south), Canterbury (9 miles north-east), Sittingbourne (11 miles north-west), Folkestone (15 miles south-east), Whitstable (10 miles north-east) and Faversham (6 miles north).

What’s near Molash

Typical jobs here are in homes near George Inn and Church of St Peter and the streets around them. For rail, the closest station is Wye station, about 3.2 miles south. Nearby you’ll also find Tower keep castle at Chilham (2.7 miles east).

Map of Molash © OpenStreetMap contributors

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What affects the price in Molash

Prices start from £350. There’s no area surcharge for Molash. What changes the price is:

  • Whether we combine several jobs
  • Access to the area
  • What kind of damage it is
  • The colour and finish to match

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed quote

Phone pictures are fine. Just ensure we can see:

  • A wider photo showing the whole bath
  • Details of any past repairs
  • Something in shot to show the size
  • Natural light rather than flash

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Landlord and trade work in Molash

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

What happens on the day

You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take the best part of a day, and you’re welcome to carry on with your day while we work.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area
  • Keep children and pets away from the room on the day

How to get a price

Most clients in Molash get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Send pictures for a quote

Advice

What we can’t put right

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Plumbing leaks, which need a plumber
  • A bath split right through the body
  • Holes rusted through the metal

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we repair

  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths

Common questions in Molash

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Are there extra charges for Molash?

There’s no separate call-out charge. The fixed price covers the visit and the work.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

What happens if you find more damage?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

What information do you need?

Just pictures, your postcode and a contact number. On the day, access to the room.

Can you change the colour of my bath?

Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Repair or replace: which is better?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.

Why Molash customers choose us

  • Dust sheets down, tidy finish
  • Most jobs done in one visit
  • A year’s guarantee on all work
  • Everything repaired in place

Take a look at our prices page or guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.