Devon · England
Bath re-enamelling & resurfacing in Molland, Devon
Problem with your bath in Molland? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
Landlord and trade work in Molland
If you manage property in Molland, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Bath re-enamelling in Molland, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Typical jobs include enamel that’s lost its shine and feels rough and a period or roll-top bath worth keeping, in acrylic baths, Victorian roll-tops and cast iron baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Where
- Molland (EX36)
- Area hub
- Devon
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
How it works
We agree an arrival time beforehand. On site, it takes most of the day in most cases. We leave the room clean and you’ll know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Related advice
Nearby places to Molland
More services for Molland
About Molland
Molland is about 14 miles north-west of Tiverton, in Devon. Wherever you are in the EX36 postcode area, a technician comes to you. Molland is one of 586 towns and villages in Devon we cover.
Jobs in EX36 work the same way as everywhere else we cover. Close by, we cover Bickingcott (1 mile west), Newtown (3 miles south-west), Knowstone (3 miles south-east), Ash Mill (4 miles south) and Hawkridge (4 miles north-east). Further out, we also cover Barnstaple (15 miles west), Tiverton (14 miles south-east), Newport (15 miles west), South Molton (6 miles west), Lynton (14 miles north-west) and Landkey (13 miles west).
Around Molland
Locally, our jobs take us to homes close to The London Inn and Church of Saint Mary. Nearby you’ll also find South Molton Hospital (5.9 miles west).
What we’re called out for in Molland
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
The things customers normally mention when they call include:
- An outdated colour you’d like to change
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
- Wear marks under the taps
Before booking anyone
- How the colour is matched
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- What happens if the damage is worse than the pictures show
What affects the price in Molland
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- What kind of damage it is
- The material
- How many areas need work
- Whether we combine several jobs
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- The material, if you know it
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- Details of any past repairs
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
When a repair is not the answer
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Steel that has corroded right through
Send us pictures and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Repair or replace in Molland?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Most jobs done in one visit
- Straight answers about what a repair can do
- Everything repaired in place
- Every repair guaranteed for a year
Read our prices page and guide to resurfacing and replacement costs.
Molland: your questions answered
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you cover Molland?
Yes, we do. Repair technicians travel to Molland from across the region, with no extra charge for travel.
Can you repair something that is been repaired before?
Typically, yes. The old repair comes out first.
About our accreditations · Every repair comes with a one-year guarantee.
