Devon · England

Non-Slip Bath Coating for Molland homes

Non-slip bath coating across Molland and nearby, done in a single visit in most cases and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Molland?

About our non-slip bath coating in Molland

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Our repair technicians work on acrylic baths, enamelled baths and wet room floors (ask us), and people most often call us about bath mats that harbour mould or get forgotten and safety for older or less mobile people.

Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
Molland (EX36)
County
Devon
Guarantee
One year on every repair
Quotes
Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Covering Molland

Molland is about 14 miles north-west of Tiverton, in Devon. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Molland is one of 586 places in Devon we cover.

Postcode districts we cover here: EX36. If you are just outside Molland, we cover Bickingcott (1 mile west), Newtown (3 miles south-west), Knowstone (3 miles south-east), Ash Mill (4 miles south) and Hawkridge (4 miles north-east). Larger places within reach include Barnstaple (15 miles west), Tiverton (14 miles south-east), Newport (15 miles west), South Molton (6 miles west), Lynton (14 miles north-west) and Landkey (13 miles west).

What’s near Molland

Typical jobs here are in homes near The London Inn and Church of Saint Mary, among other places. Further afield, we also cover the area around South Molton Hospital (5.9 miles west).

Map of Molland © OpenStreetMap contributors

Signs you need non-slip bath coating in Molland

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

The most common problems we are called about are:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

Comparing quotes

  • Whether the price is fixed and includes VAT
  • Whether there are any call-out or travel charges
  • How your room will be protected
  • Who will actually do the work

Our hiring checklist

How it works

The work is clean and fairly quiet. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, typically overnight.

Before we arrive

  • Tell us if there are stairs or a lift
  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access

Ask for a price

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Get a fixed quote

Related advice

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Work for landlords and builders

We’re used to working with agents and managing companies. Send the address, pictures and access details.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What affects the price in Molland

There are no hourly rates or hidden extras. The price is based on:

  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • The type of damage
  • Whether we combine several jobs

A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Quotes from your photos

A couple of clear pictures is all it takes. Try to include:

  • The postcode, so we can plan the visit
  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Repairing versus replacing in Molland

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

Why choose Surface Doctor in Molland

  • A fixed quote before booking
  • Accredited with CHAS, Constructionline and SafeContractor
  • Straight answers about what a repair can do
  • One-year guarantee on every repair

See our prices page.

FAQs for Molland

It’s been repaired before. Can you still fix it?

Yes, we often do. Removing the old work can add time, and that’s in the quote.

Do you cover Molland?

Yes. We cover the whole UK and travel to Molland and the rest of Devon. Send us photos for a fixed quote, or call 0345 017 0787.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Which areas do you work in?

We work UK-wide, and that includes Molland. Our prices are the same everywhere.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

How much does non-slip bath coating cost in Molland?

The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.

Is the work guaranteed?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Honest limits

Before you book, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before booking.

Materials we work on in Molland

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.