York · England
Bath Re-enamelling for Moor Monkton Moor homes
Problem with your bath in Moor Monkton Moor? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- Chips and rust in more than one place
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
How we handle bath re-enamelling in Moor Monkton Moor
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Our repair technicians work on acrylic baths, Victorian roll-tops and pressed steel baths, and common reasons people get in touch are an old resurfacing that’s failing and a bath in a colour that no longer suits.
All our work comes with a one-year guarantee, wherever you are in York.
- Area
- Moor Monkton Moor (YO26)
- Region
- York
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Moor Monkton Moor
Moor Monkton Moor is about 6 miles north-west of York, in York. Whether you are in the middle of Moor Monkton Moor or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Moor Monkton Moor is one of 79 towns and villages in York we cover. We work right across the region, from Moor Monkton Moor to Leeds (about 19 miles away).
Postcode districts we cover here: YO26. Streets in the area include Red House Lane and Church Lane. Close by, we cover Hessay (1 mile south-east), Long Marston (3 miles south), Kirk Hammerton (3 miles west), Hutton Wandesley (3 miles south) and Tockwith (4 miles south-west). Within a short drive, we also cover York (6 miles south-east), Clementhorpe (6 miles south-east), Bishophill (6 miles south-east), Hungate (6 miles east), Clifton (5 miles east) and Tang Hall (7 miles east).
Near you in Moor Monkton Moor
Our customers here include homes close to All Saints' Church. The nearest railway station is Hammerton station, roughly 2.8 miles west of the centre. Other landmarks nearby include Clifton Hospital (4.2 miles east).
Your questions about bath re-enamelling in Moor Monkton Moor
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you cover Moor Monkton Moor?
Yes. We work across the UK and come to Moor Monkton Moor. Send pictures and we’ll quote, or call 0345 017 0787.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Nearby places to Moor Monkton Moor
More services for Moor Monkton Moor
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow most of the day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Signs you need bath re-enamelling in Moor Monkton Moor
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
Look out for any of the following:
- Enamel that’s lost its shine and feels rough
- A roll-top that is seen better days
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
Comparing quotes
- Whether a trained technician does the job
- How your room will be protected
- How long it needs to cure
- Whether the price covers travel
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair will not do:
- A metal bath with a through crack
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think before you book.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Keeping it looking good
After the repair has cured, a few habits help it last:
- Don’t let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Respect the curing time we give you
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- How many areas need work
- The material and finish
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
You can normally get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
- The material, if you know it
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- No need to remove anything
- A year’s guarantee on all work
- Straight answers about what a repair can do
- One visit for most repairs
Take a look at our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
