Herefordshire · England
Bath Re-enamelling for Moorcot homes
We travel to Moorcot for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Moorcot
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with thin, worn enamel in places and a peeling or bubbling previous coating, we can help, on cast iron baths, basins & shower trays and Victorian roll-tops alike.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Moorcot (HR5)
- Region
- Herefordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
When to call us in Moorcot
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
It’s worth getting a quote if you see:
- An old resurfacing that’s failing
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Several chips and rust patches
Before booking anyone
- A fixed price, and whether VAT is included
- Whether they match the colour on site
- What prep work is covered
- How long it needs to cure
Work for landlords and builders
For anyone letting property in or around Moorcot, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Housing associations and facilities teams use us for planned and reactive repairs in Herefordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Nearby places to Moorcot
What else we do in Moorcot
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Moorcot and the surrounding area
Moorcot is about 14 miles north-west of Hereford, in Herefordshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in all 255 towns and villages across Herefordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 48 miles away.
All of HR5 is covered, from the main roads to the quietest streets. We also cover the places around Moorcot: Woonton Ash (1 mile south-west), Lower Broxwood (1 mile south), Holme Marsh (1 mile south-west), Lyonshall (1 mile west) and Woonton (2 miles south). Further out, we also cover Hereford (14 miles south-east), Leominster (9 miles east), Redhill (14 miles south-east), Newton Farm (14 miles south-east), Whitecross (13 miles south-east) and Eign Hill (14 miles south-east).
Around Moorcot
Around Moorcot, we work in homes near St Mary's Church and the streets around them. A little further out are Lyonshall Castle (1.6 miles west) and Kington Museum and History Centre (3.8 miles west). For a walk, there’s Rushock Hill and Titley Pool.
Questions from Moorcot
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
What areas do you cover?
All of Herefordshire, and the rest of the UK. Travel is included in the price.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How long does re-enamelling take?
Usually one day, with the bath ready the day after. A badly pitted bath can need a second day.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Getting a price
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
What affects the price in Moorcot
Prices start from £350. Prices are worked out job by job, from your photos. What matters most is:
- How easy the damage is to reach
- How much damage there is
- Whether we combine several jobs
- Previous DIY repairs that have to come out
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what helps:
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- The material, if you know it
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- Problems we can’t see until an old finish comes off
Send us photos and we will tell you honestly.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Should you replace it?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Moorcot. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Moorcot
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
- One price list for the whole UK
- Nothing taken out or refitted
Take a look at our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
