Herefordshire · England
Bath Repair for Moorcot homes
Bath repair in Moorcot without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips under the taps
About our bath repair in Moorcot
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. We regularly repair roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and the jobs we see most are rusty patches near the plughole and holes from dropped items.
We stand behind the work with a one-year guarantee.
- Where
- Moorcot (HR5)
- County
- Herefordshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
The process
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. You can expect it to take a morning or an afternoon, and we will tell you if anything changes.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Open a window if you can
- Let us know about parking or access
- Keep a parking space free if you can
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Advice
What else we do in Moorcot
Keeping it looking good
So the finish stays in good condition for years:
- Do not scrub with anything abrasive
- Do not leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath does not move when you stand in it
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
When we’d advise against a repair
It helps to know what we can’t do:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Wear across the entire surface, which needs re-enamelling
Send us photos and we’ll tell you honestly.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
Landlord and trade work in Moorcot
We work for landlords, letting agents and housing providers in Moorcot as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
For anyone letting property in or around Moorcot, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Repair or replace in Moorcot?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- A fixed quote before you book
- Typically one visit, start to finish
Read our full price list or bath cost comparison.
Moorcot and nearby
Moorcot is about 14 miles north-west of Hereford, in Herefordshire. Wherever you are in the HR5 postcode area, a technician comes to you. We work in 255 places in Herefordshire. Our nearest city page is Birmingham, about 48 miles away.
Postcode districts we cover here: HR5. We also travel to Woonton Ash (1 mile south-west), Lower Broxwood (1 mile south), Holme Marsh (1 mile south-west), Lyonshall (1 mile west) and Woonton (2 miles south). Within a short drive, we also cover Hereford (14 miles south-east), Leominster (9 miles east), Redhill (14 miles south-east), Newton Farm (14 miles south-east), Whitecross (13 miles south-east) and Eign Hill (14 miles south-east).
Landmarks near Moorcot
In Moorcot, that means homes near St Mary's Church. Nearby you will also find Lyonshall Castle (1.6 miles west) and Kington Museum and History Centre (3.8 miles west). Open spaces near Moorcot include Rushock Hill and Titley Pool.
Your questions about bath repair in Moorcot
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
What affects the price in Moorcot
Prices start from £95. Every quote is fixed and free. What we look at:
- The colour and finish to match
- Doing more than one item at once
- Access to the area
- The material
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- Any details about the material
- Something in shot to show the size
For a price in Moorcot, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
