Lincolnshire · England
Bath re-enamelling & resurfacing in Moorhouses, Lincolnshire
Bath re-enamelling in and around Moorhouses: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Moorhouses without replacing anything
If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on Victorian roll-tops, basins & shower trays and cast iron baths, and the jobs we see most are a coloured bath you want in white and a period or roll-top bath worth keeping.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Moorhouses (PE22)
- Area hub
- Lincolnshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About Moorhouses
Moorhouses is about 9 miles north of Boston, in Lincolnshire. Anywhere in PE22, a technician comes to you. We cover 732 places across Lincolnshire. Our jobs stretch from Moorhouses to Leeds (78 miles away).
Here we cover the PE22 postcode area. We also travel to Medlam (2 miles east), Carrington (2 miles south-east), Stickney (4 miles east), Gipsey Bridge (5 miles south) and Northlands (5 miles south-east). Within a short drive, we also cover Boston (9 miles south), Sleaford (15 miles south-west), Horncastle (8 miles north), Woodhall Spa (7 miles north-west), Witham (8 miles south) and Staniland (9 miles south).
Around Moorhouses
Typical jobs here are in homes near St Lawrence. Other landmarks nearby include Battle Of Britain Memorial Flight Visitor Centre (3.8 miles west) and Tattershall Castle (4.4 miles west).
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Avoid suction-cup mats
- Keep toiletries on a shelf rather than in the bath
- Rinse off hair dye, oils and bath bombs right away
- Clean with a soft cloth and mild detergent
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repairing versus replacing in Moorhouses
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why book with us
- No need to remove anything
- Usually one visit, start to finish
- Colour mixed on the day to match
- Same prices wherever you are
Take a look at our pricing or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Moorhouses. The price comes down to:
- What the surface is made of
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
Phone photos are fine. Ensure they show:
- One sharp close-up of the damage
- Natural light rather than flash
- Your postcode, so we can check dates
- What it’s made of, if you know
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
When we would advise against a repair
It helps to know what we cannot do:
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. It normally takes a full day.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
How to get a price
Upload a picture of the damage and a wider shot of the entire item, with your PE22 postcode, and we’ll reply with a fixed quote.
Read more
FAQs for Moorhouses
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do you work in Moorhouses?
We do. We send a technician to Moorhouses for every job, and the price is the same as everywhere else.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Landlord and trade work in Moorhouses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Towns and villages near Moorhouses
What else we do in Moorhouses
About our accreditations · Every repair comes with a one-year guarantee.
