Oldham · England
Bath re-enamelling & resurfacing in Moorside, Oldham
We travel to Moorside for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A roll-top that’s seen better days
How we handle bath re-enamelling in Moorside
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on Victorian roll-tops, pressed steel baths and cast iron baths, and the jobs we see most are brown or grey marks that don’t clean off and several chips and rust patches.
Whatever the size of the job, you get the same one-year guarantee in Moorside and across Oldham.
- Location
- Moorside (OL4, OL1)
- Region
- Oldham
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
What bath re-enamelling costs
Prices start from £350. There’s no area surcharge for Moorside. What changes the price is:
- Where the damage is and how we get to it
- Whether we combine several jobs
- The colour and finish to match
- The material
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- Any earlier repairs or coatings
- The material, if you know it
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
What we do, step by step
We work cleanly and quietly. We protect the area first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
FAQs for Moorside
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long does re-enamelling take?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Our work in Moorside
Moorside is about 2 miles north-east of Oldham, in Oldham. We travel to homes and businesses in Moorside, so nothing has to leave your home. Moorside is one of 72 places in Oldham we cover. We work right across the region, from Moorside to Manchester (8 miles away).
Jobs in OL4 and OL1 are booked in the same way as anywhere else. Whether you live on Cop Road, Alva Road and King Lane or anywhere nearby, a technician can come to you. With the A672 close by, Moorside is simple for us to get to. We also cover the places around Moorside: Sholver (1 mile north), Watersheddings (1 mile south-west), Top o' th' Meadows (1 mile south-east), Crossbank (1 mile south) and Waterhead (1 mile south-west). Further out, we also cover Chadderton (3 miles south-west), Failsworth (5 miles south-west), Coppice (3 miles south-west), Werneth (3 miles south-west), Hathershaw (3 miles south-west) and Cowhill (3 miles south-west).
Around Moorside
Typical jobs here are in homes near Church of St Thomas, Oldham Pupil Referral Unit and The Village Inn. Nearby too are Counthill School (under half a mile south) and Hodge Clough Primary School (under half a mile north-west). The closest station to Moorside is Greenfield station, about 2.9 miles south-east. A little further out are Royal Oldham Hospital (2 miles west) and Werneth Park Lifelong Learning Centre (2.9 miles south-west). The countryside around Moorside includes Tandle Hill.
Landlords, agents and businesses in Moorside
We work for landlords, letting agents and housing providers in Moorside as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
When we would advise against a repair
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
Read our pricing or guide to resurfacing and replacement costs.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Nearby places to Moorside
Also in Moorside
Do you need bath re-enamelling in Moorside?
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, usually first under the taps and around the waste.
Customers normally contact us about:
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
What to look for in a quote
- The length of the guarantee and what it covers
- What preparation is included
- Is the price fixed, and does it include VAT?
- If travel is included in the price
About our accreditations · Every repair comes with a one-year guarantee.
