Lincolnshire · England
Bath re-enamelling & resurfacing in Moortown, Lincolnshire
Bath re-enamelling for Moortown, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
About our bath re-enamelling in Moortown
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with wear marks under the taps and a coating lifting around the plughole, we can help.
Big or small, it’s backed by a one-year guarantee in Moortown and across Lincolnshire.
- Where
- Moortown (LN7)
- County
- Lincolnshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Moortown
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we’re asked about most:
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Comparing quotes
- Whether a trained technician does the job
- What prep work is covered
- What happens if the damage is worse than the pictures show
- What protection goes down before work starts
Nearby places to Moortown
More services for Moortown
Moortown and nearby
Moortown is about 13 miles south-east of Scunthorpe, in Lincolnshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Moortown is one of 732 places in Lincolnshire where we work. Our nearest city page is Leeds, about 53 miles away.
Our visits in LN7 are booked in the same way as anywhere else. Whether you live on Kelsey Road, Holton Road and Brigg Road or anywhere nearby, a technician can come to you. If you are just outside Moortown, we cover South Kelsey (2 miles west), Thornton le Moor (2 miles south-west), North Kelsey Moor (2 miles north), North Kelsey (2 miles north-west) and Nettleton (2 miles east). We also work in nearby towns such as New Waltham (14 miles east), Humberston (15 miles east), Market Rasen (7 miles south), Welton (12 miles south), Nettleham (15 miles south) and Kirton in Lindsey (8 miles west).
Near you in Moortown
Typical jobs here are in homes near Skipworth Arms and Church of Saint Luke. A little further out are Caistor Castle Hill (3.1 miles north-east). Open spaces near Moortown include Wolds Top.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Wash away dyes and oils after use
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take most of the day, tidy-up included.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Have a window or extractor fan available
How to get a price
If you’re in Moortown and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- The material
- How much damage there is
Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Two or three clear pictures are normally enough. Try to include:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Any details about the material
- A clear, close picture of the problem area
Most customers in Moortown get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Honest limits
To be straight with you, some problems need a different fix:
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Landlords, agents and businesses in Moortown
We work for landlords, letting agents and housing providers in Moortown as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Repairing versus replacing in Moortown
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
- CHAS and Constructionline accredited
- One-year guarantee on every repair
Take a look at our full price list or resurfacing vs replacement cost guide.
Moortown: your questions answered
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Are there extra charges for Moortown?
We do not add a call-out fee. Your fixed quote includes everything.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Can you fix a peeling bath coating?
Generally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
