Lincolnshire · England

Bath Re-enamelling in South Kelsey

Local bath re-enamelling for South Kelsey: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in South Kelsey

About our bath re-enamelling in South Kelsey

Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for a bath in a colour that no longer suits and a period or roll-top bath worth keeping, in basins & shower trays, cast iron baths and pressed steel baths.

Big or small, it’s backed by a one-year guarantee in South Kelsey and across Lincolnshire.

Roll-top bath being refinished by a Surface Doctor technician
Area
South Kelsey (LN7)
County
Lincolnshire
Warranty
One year on every repair
Quote
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Prices and what affects them

Resurfacing from £350. There’s no area surcharge for South Kelsey. The price reflects:

  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear
  • The material
  • How easy the damage is to reach

Our prices are the same across the UK, with no extra for South Kelsey. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from photos

You can normally get a fixed price without us visiting. To make it quick:

  • Whether it’s been repaired or coated before
  • The postcode, so we can plan the visit
  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare

Upload a picture of the damage and a wider shot of the whole item, and tell us you’re in South Kelsey, and we’ll reply with a fixed quote.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Your questions about bath re-enamelling in South Kelsey

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you cover South Kelsey?

We do. Technicians travel to South Kelsey from across the region, with no extra charge for travel.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Repairing versus replacing in South Kelsey

A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the day after. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • Nothing taken out or refitted
  • Dust sheets down, tidy finish
  • One visit for most repairs
  • Colour mixed on the day to match

Read our prices page and guide to resurfacing and replacement costs.

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Avoid suction-cup mats
  • Store bottles off the bath
  • Repair dripping taps early
  • A quick wipe after use keeps limescale away

Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.

Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • A poorly supported acrylic bath, until it’s firmed up
  • A bath that’s rusted through
  • Plumbing leaks, which need a plumber

If in doubt, send pictures and we will say what we think.

Materials we work on in South Kelsey

  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

What happens on the day

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Keep a parking space free if you can
  • Tell us if there are stairs or a lift
  • Let us know if it has been repaired before

Get a quote

The quickest way to a price is to send a couple of pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.

Get a fixed quote

Related advice

Landlord and trade work in South Kelsey

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Landlords, letting agents and housing providers in South Kelsey use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Covering South Kelsey

South Kelsey is about 11 miles south-east of Scunthorpe, in Lincolnshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. South Kelsey is one of 732 places in Lincolnshire where we work. We work right across the region, from South Kelsey to Leeds (51 miles away).

All of LN7 is covered. Local streets include Forge Close, Brigg Road and Waddingham Road, all of which we cover. If you are just outside South Kelsey, we cover Thornton le Moor (2 miles south), Moortown (2 miles east), North Kelsey (2 miles north), North Owersby (3 miles south-east) and North Kelsey Moor (3 miles north-east). We also work in nearby towns such as Gainsborough (15 miles west), Market Rasen (7 miles south-east), Welton (12 miles south), Nettleham (14 miles south), Kirton in Lindsey (7 miles west) and Caistor (5 miles east).

Local landmarks in South Kelsey

Typical jobs here are in homes near Bull Inn and Church of St Mary, among other places. A little further out are Medieval castle and ecclesiastical complex (3.6 miles south).

Map of South Kelsey © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.