Lincolnshire · England
Bath Re-enamelling in North Owersby
Full bath re-enamelling and resurfacing at your home in North Owersby, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that’s seen better days
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
About our bath re-enamelling in North Owersby
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair basins & shower trays, cast iron baths and Victorian roll-tops, and common reasons people get in touch are a peeling or bubbling previous coating and enamel that’s lost its shine and feels rough.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- North Owersby (LN8)
- County
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in North Owersby
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
The most common problems we’re called about are:
- A period or roll-top bath worth keeping
- Stains that will not shift
- A bath that stays dull however much you clean it
- Several chips and rust patches
Questions to ask before booking
- What aftercare is recommended
- How long it needs to cure
- What happens if they find more damage
- What protection goes down before work starts
Places near North Owersby
What else we do in North Owersby
Keeping it looking good
To keep it looking its best for years:
- Have chips seen to early
- Avoid suction-cup mats
- Respect the curing time we give you
- Repair dripping taps early
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Landlords, agents and businesses in North Owersby
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
North Owersby and the surrounding area
North Owersby is about 14 miles south-east of Scunthorpe, in Lincolnshire. Whether you’re in the middle of North Owersby or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 732 towns and villages across Lincolnshire, from the larger towns to small villages. Our nearest city page is Leeds, about 54 miles away.
Our visits in LN8 work the same way as everywhere else we cover. We regularly work on streets such as Moor Road and Thornton Road and the roads around them. Other places close to North Owersby include South Owersby (1 mile south), Thornton le Moor (1 mile north-west), Osgodby (2 miles south-east), South Kelsey (3 miles north-west) and Moortown (3 miles north). Further out, we also cover Gainsborough (15 miles west), New Waltham (15 miles north-east), Ermine (14 miles south-west), Market Rasen (5 miles south-east), Welton (10 miles south) and Nettleham (12 miles south).
Local landmarks in North Owersby
In North Owersby, that means homes near Church of St.Martin and the streets around them. The closest station to North Owersby is Market Rasen station, roughly 4.6 miles south-east. Further afield, we also cover the area around Medieval castle and ecclesiastical complex (1.2 miles south). Not far away are Wolds Top.
Repairing versus replacing in North Owersby
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why North Owersby clients choose us
- Most jobs done in one visit
- A year’s guarantee on all work
- A fixed quote before you book
- Colour-matched on site
Take a look at our prices page and bath cost comparison.
Your questions about bath re-enamelling in North Owersby
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How long does re-enamelling take?
Most baths are done in a day, ready the following day. We’ll confirm timings when we quote.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How the visit works
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take the best part of a day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
