Isle of Anglesey · Wales
Bath re-enamelling & resurfacing in Morawelon, Isle of Anglesey
Fixed-price bath re-enamelling in Morawelon and the surrounding area, normally in one visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Morawelon
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We regularly repair Victorian roll-tops, basins & shower trays and acrylic baths, and common reasons people contact us are enamel that’s lost its shine and feels rough and staining under the taps and around the waste.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Morawelon (LL65)
- County
- Isle of Anglesey
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Morawelon
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Have chips seen to early
- Don’t leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
- Do not use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Landlord and trade work in Morawelon
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Morawelon, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- A year’s guarantee on all work
- CHAS and Constructionline accredited
Read our pricing and guide to resurfacing and replacement costs.
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Morawelon. The price depends on:
- Unusual colours or finishes
- The material
- Access to the area
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your photos
You can generally get a fixed price without us visiting. To help us price it:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Natural light rather than flash
- Details of any past repairs
For a price in Morawelon, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
How it works
Arrival times are agreed in advance. Once we’re there, the work takes most of the day for most jobs. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Make sure the area is dry
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Related advice
Where we work around Morawelon
Morawelon is about 1 mile east of Holyhead, in Isle of Anglesey. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Morawelon is one of 115 towns and villages in Isle of Anglesey where we work. You can also see our page for Liverpool, about 70 miles away.
All of LL65 is within our area. We regularly work on streets such as Cyttir Road, Priory Lane and Llanfawr Road. Nearby, we also work in Blackbridge (1 mile west), Isle of Anglesey (1 mile south), Holyhead (1 mile west), Stryd (1 mile west) and Porth-y-Felin (1 mile north-west). Larger places within reach include Llangefni (13 miles east), Amlwch (14 miles north-east), Valley (3 miles south-east), Rhosneigr (7 miles south-east), Pencraig (14 miles east) and Cemaes (10 miles north-east). Being one of Isle of Anglesey’s larger places, Morawelon is somewhere we visit frequently.
Landmarks near Morawelon
Locally, our jobs take us to homes close to Breakwater Country Park, Ysgol Llanfawr and Prince of Wales pub. Morawelon has its own railway station: Holyhead station. Well-known places in the area include Caer Gybi (0.5 miles north-west) and Ysbyty Penrhos Stanley (less than half a mile south-east). Open spaces near Morawelon include Tre-wilmot and Llyn Dinam.
Places near Morawelon
What else we do in Morawelon
About our accreditations · Every repair comes with a one-year guarantee.
