Isle of Anglesey · Wales
Bath Re-enamelling in Isle of Anglesey
Bath re-enamelling in and around Isle of Anglesey: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
What affects the price in Isle of Anglesey
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Access to the area
- How many areas need work
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Getting a price from pictures
Phone photos are fine, there is no need for anything special. Just ensure we can see:
- Details of any past repairs
- Where you are, by postcode
- A close-up of the damage, in focus
- A photo taken from further back
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Bath re-enamelling in Isle of Anglesey, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our technicians work on Victorian roll-tops, acrylic baths and pressed steel baths, and the jobs we see most are an original cast iron bath that needs restoring and chips and rust in more than one place.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Isle of Anglesey (LL65)
- Region
- Isle of Anglesey
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
What we’re called out for in Isle of Anglesey
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Contact us if you’ve noticed:
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
- An outdated colour you’d like to change
Comparing quotes
- Whether there are any call-out or travel charges
- How long it needs to cure
- How to care for the finish
- How changes to the job are handled
Where we work around Isle of Anglesey
Isle of Anglesey (Welsh: Sir Ynys Mon) is about 1 mile south-east of Holyhead, in Isle of Anglesey. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We work in 115 places in Isle of Anglesey, from the larger towns to small villages. You can also see our page for Liverpool, about 70 miles away.
Postcode districts we cover here: LL65. Whether you live on Penrhos Beach Road, Mill Road and Porthdafarch Road or a nearby road, we can come to you. With the A55 and A5153 close by, Isle of Anglesey is simple for us to get to. Neighbouring places we cover include Blackbridge (1 mile north-west), Morawelon (1 mile north), Holyhead (1 mile north-west), Stryd (1 mile north-west) and Pont-Hwfa (1 mile north-west). Within a short drive, we also cover Llangefni (13 miles east), Amlwch (14 miles north-east), Valley (3 miles east), Rhosneigr (7 miles south-east), Pencraig (14 miles east) and Cemaes (10 miles north-east).
Near you in Isle of Anglesey
Typical jobs here are in homes near Standing Stones pub, Saint Mary's Church and Ysgol Gymraeg Morswyn and the streets around them. Isle of Anglesey’s nearest station is Holyhead station, roughly 0.5 miles north-west. Further afield, we also cover the area around Ysbyty Penrhos Stanley (within half a mile north-east) and Caer Gybi (0.8 miles north-west). Not far away are South Stack Cliffs RSPB reserve and Tre-wilmot.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take most of the day, and you’re welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let the surface dry out before the visit
- Clear the area around the damage
- Tell us about any previous repairs or coatings
Get a quote
If you’re in Isle of Anglesey and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Repair or replace: which is better?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Isle of Anglesey. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
- Every repair guaranteed for a year
See our prices page and resurfacing vs replacement cost guide.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Common questions in Isle of Anglesey
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you cover the whole of Isle of Anglesey?
We work UK-wide, so Isle of Anglesey is covered. Our prices are the same everywhere.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Towns and villages near Isle of Anglesey
More services for Isle of Anglesey
Looking after it afterwards
Once the work has cured, treat it gently:
- Avoid suction-cup mats
- Don’t use the bath until it has fully cured
- Repair dripping taps early
- Don’t leave a chip unrepaired
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
About our accreditations · Every repair comes with a one-year guarantee.
