Devon · England
Bath re-enamelling & resurfacing in Moreleigh, Devon
Bath re-enamelling across Moreleigh and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- Wear marks under the taps
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- Any earlier repairs that need removing first
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- How many areas need work
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
When you take your pictures, these tips help us give you a firm price:
- A photo taken from further back
- Your postcode, so we can check dates
- Details of any past repairs
- Natural light rather than flash
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Bath re-enamelling in Moreleigh, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include a coating lifting around the plughole and a bath in a colour that no longer suits, across cast iron baths, Victorian roll-tops and acrylic baths.
Big or small, it’s backed by a one-year guarantee.
- Location
- Moreleigh (TQ9)
- County
- Devon
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Work for landlords and builders
For anyone letting property in or around Moreleigh, we will quote for several properties at once. Just send photos for each address and we will price them together.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Towns and villages near Moreleigh
Other services in Moreleigh
Repairing versus replacing in Moreleigh
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the next day. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Usually one visit, start to finish
- Straight answers about what a repair can do
- We leave the room as we found it
- One-year guarantee on every repair
See our full price list or bath cost comparison.
Questions from Moreleigh
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you work in Moreleigh?
Yes. We work across the UK and travel to Moreleigh. Send photos and we’ll quote, or call 0345 017 0787.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
What happens on the day
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. It normally takes the best part of a day, and we’ll keep you posted as we go.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Common problems we fix in Moreleigh
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Customers typically contact us about:
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
- Lots of chips and rust spots
Before booking anyone
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- How the room is protected while they work
Moreleigh and the surrounding area
Moreleigh is about 5 miles south-west of Totnes, in Devon. Our technicians come to homes and businesses in Moreleigh and the surrounding area, so there is no workshop to go to. We work in all 586 towns and villages across Devon, from the larger towns to small villages.
Here we cover the TQ9 postcode area. We also cover the places around Moreleigh: Halwell (1 mile east), Harbertonford (2 miles north-east), East Allington (3 miles south), Blackawton (3 miles south-east) and Allaleigh (3 miles east). Larger places within reach include Newton Abbot (13 miles north-east), Kingsteignton (14 miles north-east), Ivybridge (8 miles west), Totnes (5 miles north-east), Dartmouth (7 miles east) and Kingsbridge (6 miles south).
Landmarks near Moreleigh
Locally, our jobs take us to homes close to All Saints Church and New Inn, among other places. Other landmarks nearby include South Hams Hospital (5.4 miles south) and Blackawton The Mount (3.4 miles east). Open spaces near Moreleigh include Andrew's Wood.
How to care for the repair
So the finish stays in good condition:
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Repair dripping taps early
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
About our accreditations · Every repair comes with a one-year guarantee.
