Devon · England
Bath Re-enamelling for Dartmouth homes
Bath re-enamelling in Dartmouth without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Wear marks under the taps
Common questions in Dartmouth
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Are there extra charges for Dartmouth?
No. Our quotes include travel, with the same prices everywhere we work.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Dartmouth.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
How much does bath re-enamelling cost in Dartmouth?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Bath re-enamelling in Dartmouth without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Typical jobs include stains that won’t shift and worn patches where water runs and sits, on Victorian roll-tops, basins & shower trays and acrylic baths.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Dartmouth (TQ6)
- County
- Devon
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
How to look after the repair
Nothing complicated is needed:
- Get any chip repaired quickly
- Do not use the bath until it has fully cured
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What happens on the day
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Open a window if you can
- Keep pets and children out of the room while we work
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Read more
Work for landlords and builders
Landlords, letting agents and housing providers in Dartmouth use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Dartmouth
Prices start from £350. You will know the full cost before you book. We look at:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- How many items we do on one visit
- The material
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Where you are, by postcode
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say right away if a repair is the right fix.
Covering Dartmouth
Dartmouth is about 4 miles south-west of Brixham, in Devon. Anywhere in TQ6, we carry out the work at your property. Our repair technicians cover 586 places across Devon.
We cover every part of TQ6 and the streets around it. Jobs here include addresses on Church Road, Town Close and Fair View Road. You will find Dartmouth on the A379 and A3122, so it’s easy for us to reach. We also cover the places around Dartmouth: Townstal (1 mile west), Warfleet (1 mile south-east), Kingswear (1 mile east), Stoke Fleming (2 miles south) and Hillhead (3 miles north-east). Further out, we also cover Newton Abbot (12 miles north), Teignmouth (14 miles north), Kingsteignton (14 miles north), Ivybridge (15 miles west), Totnes (7 miles north-west) and Kingsbridge (10 miles south-west).
Around Dartmouth
We visit homes around Church of St Saviour, Browns pub and St John the Baptist Roman Catholic Primary School and the streets around them. Nearby you’ll also find Bayard's Cove Fort (less than half a mile south-east) and Brixham Community Hospital (4.1 miles north-east).
Also in Dartmouth
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Colour-matched on site
- Same prices wherever you are
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
Take a look at our full price list and bath cost comparison.
What we’re called out for in Dartmouth
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
The most common problems we’re called about are:
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- An outdated colour you’d like to change
Comparing quotes
- How your room will be protected
- How soon you can use it again
- What happens if the damage is worse than the pictures show
- What the guarantee covers, and for how long
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
