Devon · England

Bath Re-enamelling in Blackawton

Problem with your bath in Blackawton? We repair it in place, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • Several chips and rust patches
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Blackawton

Bath re-enamelling in Blackawton, done in place

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair pressed steel baths, Victorian roll-tops and basins & shower trays, and people most frequently call us about a roll-top that’s seen better days and worn patches where water runs and sits.

Whatever the size of the job, you get the same one-year guarantee in Blackawton and across Devon.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Blackawton (TQ9)
Region
Devon
Warranty
12 months on all our work
Quotes
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

What happens on the day

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Clear the area around the damage
  • Tell us if there are stairs or a lift
  • Avoid using the area for a few hours before we arrive

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

Send photos for a quote

Advice

Blackawton questions

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Can you do the outside of a roll-top?

Yes. Inside and out if you’d like.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Landlords, agents and businesses in Blackawton

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

What we can’t put right

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • A poorly supported acrylic bath, until it’s firmed up
  • Steel that has corroded right through
  • A cast iron or steel bath that’s cracked right through

Send us pictures and we’ll tell you honestly before booking.

Materials we work on in Blackawton

  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Looking after it afterwards

How the surface is treated afterwards matters:

  • Get any chip repaired quickly
  • Leave the bath for the full curing time before using it
  • Wipe the bath dry after use in hard water areas
  • Clean with a soft cloth and mild detergent

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Repair or replace: which is better?

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Why book with us

  • Rooms protected and left tidy
  • One price list for the entire UK
  • Typically one visit, start to finish
  • Everything repaired in place

See our prices page or guide to resurfacing and replacement costs.

Covering Blackawton

Blackawton is about 8 miles south-west of Brixham, in Devon. Customers in Blackawton get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Our technicians cover 586 places in Devon, from the larger towns to small villages.

Jobs in TQ9 work the same way as everywhere else we cover. Local streets include Main Street, Vicarage Road and The Grove. If you’re just outside Blackawton, we cover Allaleigh (2 miles north), Strete (3 miles south-east), Tuckenhay (3 miles north), Cornworthy (3 miles north-east) and Blackpool (3 miles south-east). Within a short drive, we also cover Newton Abbot (13 miles north), Kingsteignton (15 miles north), Ivybridge (11 miles west), Totnes (6 miles north), Dartmouth (4 miles east) and Kingsbridge (6 miles south-west).

What’s near Blackawton

Our clients here include homes close to Blackawton Primary School, George Inn and Church of St Michael. Nearby you’ll also find South Hams Hospital (5.9 miles south-west) and Blackawton The Mount (1 mile north-east). Green spaces nearby include Slapton Ley.

Map of Blackawton © OpenStreetMap contributors

Do you need bath re-enamelling in Blackawton?

Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is usually perfectly sound.

These are the problems we are asked about most:

  • Thin, worn enamel in places
  • Chips and rust in more than one place
  • Enamel that’s lost its shine and feels rough
  • A coating lifting around the plughole

What your quote should include

  • What happens if the damage is worse than the photos show
  • Whether cleaning and preparation are in the price
  • Who will actually do the work
  • How your room will be protected

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.