Oxfordshire · England
Bath re-enamelling & resurfacing in Moreton, Oxfordshire
Full bath re-enamelling and resurfacing for homes and businesses in Moreton and across Oxfordshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An old resurfacing that’s failing
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our bath re-enamelling in Moreton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on acrylic baths, pressed steel baths and cast iron baths, and the jobs we see most are enamel that’s lost its shine and feels rough and chips and rust in more than one place.
You get a one-year guarantee, the same in Moreton as everywhere else we work.
- Area
- Moreton (OX9)
- County
- Oxfordshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Moreton
What else we do in Moreton
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price is based on:
- The type of damage
- How hard the colour is to match
- How easy the damage is to reach
- The size and number of damaged areas
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- Any earlier repairs or coatings
- The material, if you know it
- A wider photo showing the entire bath
- Daylight if possible, and no flash reflection
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Moreton questions
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We will confirm timings when we quote.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Where we work around Moreton
Moreton is about 1 mile south-west of Thame, in Oxfordshire. Across the OX9 area, a technician comes to you. Moreton is one of 443 towns and villages in Oxfordshire we cover. Our nearest city page is London, about 42 miles away.
We cover every part of OX9 and the streets around it. Nearby, we also work in Thame (1 mile north-east), Towersey (2 miles east), Long Crendon (3 miles north), Sydenham (3 miles south-east) and Emmington (3 miles south-east). Within a short drive, we also cover Oxford (10 miles west), Didcot (14 miles south-west), Bicester (13 miles north-west), Abingdon-on-Thames (13 miles west), Henley-on-Thames (15 miles south) and Kidlington (14 miles north-west).
What’s near Moreton
Typical jobs here are in homes near Church of St Mary, St Joseph's Catholic Primary School and Lord Williams's School, among other places. The nearest railway station is Haddenham & Thame Parkway station, roughly 3.2 miles north-east. Nearby you’ll also find Thame Community Hospital (1.2 miles east) and Thame Museum (0.9 miles north-east). The countryside around Moreton includes Snakemoor.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Do you need bath re-enamelling in Moreton?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Keep an eye out for these signs:
- A roll-top that’s seen better days
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
Comparing quotes
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- Who turns up on the day
- When it can be used again
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Wash away dyes and oils after use
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Moreton customers choose us
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
- We leave the room as we found it
- Honest advice, even when it means no job
See our pricing and resurfacing vs replacement cost guide.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
