Oxfordshire · England
Bath re-enamelling & resurfacing in Moulsford, Oxfordshire
Our repair technicians come to Moulsford for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Bath re-enamelling at your home in Moulsford
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair pressed steel baths, acrylic baths and basins & shower trays, and people most often call us about a period or roll-top bath worth keeping and several chips and rust patches.
All our work comes with our one-year guarantee.
- Location
- Moulsford (OX10)
- Region
- Oxfordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Moulsford
What else we do in Moulsford
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your pictures. What matters most is:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How easy the damage is to reach
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
How to get a fixed quote
Most quotes are done from photos alone. To help us price it:
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Natural light rather than flash
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Common problems we fix in Moulsford
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Contact us if you’ve noticed any of these:
- Worn patches where water runs and sits
- Chips and rust in more than one place
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
What to look for in a quote
- Who turns up on the day
- Whether the price covers travel
- How long it needs to cure
- Whether they match the colour on site
Honest limits
Before you book, it’s worth knowing the limits too:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Your questions about bath re-enamelling in Moulsford
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
How do I get a price for bath re-enamelling in Moulsford?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before.
The process
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.
Related advice
Our work in Moulsford
Moulsford is about 6 miles south-east of Didcot, in Oxfordshire. We travel to homes and businesses in Moulsford, so nothing has to leave your home. Our technicians cover all 443 towns and villages across Oxfordshire, from the larger towns to small villages. Our nearest city page is London, about 46 miles away.
Our visits in OX10 are booked in the same way as anywhere else. Whether you live on The Street, Glebe Close and Willow Court Lane or a nearby road, we can come to you. We also cover the places around Moulsford: South Stoke (1 mile east), Cholsey (1 mile north), North Stoke (2 miles north-east), Streatley (2 miles south) and Goring (2 miles south). Larger places within reach include Oxford (14 miles north), Didcot (6 miles north-west), Abingdon-on-Thames (10 miles north-west), Thame (15 miles north-east), Wantage (12 miles west) and Henley-on-Thames (11 miles east).
Near you in Moulsford
Locally, our jobs take us to homes close to South Stoke Primary School, Cranford House School and Church of St John the Baptist and the streets around them. For rail, the closest station is Cholsey station, roughly 1.3 miles north. Nearby you’ll also find Wallingford Castle (3.7 miles north). The countryside around Moulsford includes Withymead Nature Reserve and Churn Hill.
Repair or replace in Moulsford?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why choose Surface Doctor in Moulsford
- No extra charge for your area
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
See our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
