Lincolnshire · England

Bath re-enamelling & resurfacing in Moulton, Lincolnshire

Full bath re-enamelling and resurfacing for homes and businesses in Moulton and across Lincolnshire. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • An old resurfacing that is failing
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Moulton

Bath re-enamelling in Moulton, done in place

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Whether it’s an original cast iron bath that needs restoring and lots of chips and rust spots, we can typically put it right.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Technician in a mask working on a freestanding roll-top bath
Location
Moulton (PE12)
Area hub
Lincolnshire
Cover
12 months on all our work
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

Do you need bath re-enamelling in Moulton?

A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

The most common problems we’re called about are:

  • A coating lifting around the plughole
  • A period or roll-top bath worth keeping
  • Several chips and rust patches
  • Thin, worn enamel in places

Questions to ask before booking

  • A fixed quote, and whether VAT is included
  • What prep work is covered
  • How the colour is matched
  • How long the guarantee is and what it covers

Our hiring checklist

Looking after it afterwards

To keep it looking its best for years:

  • Dry the bath after use to stop limescale
  • Leave the bath for the full curing time before using it
  • Keep suction mats out of the bath
  • Rinse off hair dye, oils and bath bombs right away

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.

If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

Questions from Moulton

How do I book?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

How much does bath re-enamelling cost in Moulton?

Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up and a photo of the whole item with your PE12 postcode.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.

What happens next?

We come back with a fixed quote, plus dates. You are under no obligation.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Do you work for landlords and businesses?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

How it works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the next day, the bath is ready.

How to prepare

  • Move bottles, mats and clutter away from the area
  • Let us know if it has been repaired before
  • Plan for the room to be out of bounds to pets and children

Ask for a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Advice

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Landlords, agents and businesses in Moulton

Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.

Should you replace it?

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

What you get with us

  • No need to remove anything
  • Free fixed quotes from pictures
  • Same prices wherever you are
  • A year’s guarantee on all work

Read our pricing and guide to resurfacing and replacement costs.

What affects the price in Moulton

Prices start from £350. We price every job individually. The main factors are:

  • Previous DIY repairs that have to come out
  • Whether we combine several jobs
  • The size and number of damaged areas
  • The colour and finish to match

We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

Before you send pictures, these tips help us give you a firm price:

  • The postcode, so we can plan the visit
  • What it’s made of, if you know
  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Our work in Moulton

Moulton is about 4 miles east of Spalding, in Lincolnshire. Jobs in Moulton are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in 732 places across Lincolnshire, from the larger towns to small villages. We work right across the region, from Moulton to Birmingham (80 miles away).

All of PE12 is within our area, from the main roads to the quietest streets. From High Street, Harrox Square and Church Walk or anywhere nearby, we can come to you. Moulton is on the B1357, so it’s easy for us to reach. Other places close to Moulton include Whaplode (1 mile east), Austendike (1 mile south), Weston Hills (2 miles south-west), Whaplode St Catherine (3 miles south-east) and Moulton Chapel (4 miles south). Larger places within reach include Boston (12 miles north), Spalding (4 miles west), Bourne (13 miles west), Holbeach (3 miles east), Austerby (13 miles west) and Market Deeping (13 miles south-west).

Local landmarks in Moulton

Our customers here include homes close to The John Harrox Primary School, Church of All Saints and The Swan Public House, among other places. The nearest railway station is Spalding station, roughly 3.9 miles west. Further afield, we also cover the area around Museum of Entertainment (2.9 miles south-east) and Moulton Castle (1.7 miles south).

Map of Moulton © OpenStreetMap contributors

What a repair can’t fix

Some jobs are not right for a repair, for example:

  • An acrylic bath that flexes badly underfoot
  • A cast iron or steel bath that is cracked right through
  • Holes rusted through the metal

Send us photos and we’ll tell you honestly.

Materials we work on in Moulton

  • Pressed steel baths
  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.