Blackburn with Darwen · England
Bath Re-enamelling in Myerscough Smithy
Bath re-enamelling across Myerscough Smithy and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Several chips and rust patches
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before you book. We take into account:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- What the surface is made of
- The size and number of damaged areas
The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
Quotes from your photos
You can usually get a fixed price without us visiting. To make it quick:
- A picture taken from further back
- Where you are, by postcode
- Something in shot to show the size
- Details of any past repairs
Most clients in Myerscough Smithy get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
How we handle bath re-enamelling in Myerscough Smithy
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for a bath that stays dull however much you clean it and lots of chips and rust spots, across cast iron baths, pressed steel baths and basins & shower trays.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Myerscough Smithy (BB2)
- Area hub
- Blackburn with Darwen
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When we would advise against a repair
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
- A metal bath with a through crack
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Our work in Myerscough Smithy
Myerscough Smithy is about 4 miles south-east of Longridge, in Blackburn with Darwen. Across the BB2 area, we come to you. Myerscough Smithy is one of 42 places in Blackburn with Darwen where we work. You can also see our page for Manchester, about 25 miles away.
Jobs in BB2 are booked in the same way as anywhere else. Neighbouring places we cover include Balderstone (1 mile north), Mellor Brook (1 mile south-east), Samlesbury (1 mile south-west), Osbaldeston (1 mile east) and Turner Green (1 mile south-west). Larger places within reach include Blackburn (4 miles south-east), Darwen (7 miles south-east), Mill Hill (4 miles south-east), Bastwell (4 miles east), Bank Hey (4 miles east) and Whalley Range (4 miles south-east).
Local landmarks in Myerscough Smithy
We visit homes around The Feilden's Arms, St Leonard's Church and St Mary's Roman Catholic Primary School, among other places. For rail, the closest station is Ramsgreave & Wilpshire station, roughly 3.5 miles east of the centre. Nearby you will also find Ribchester Roman Museum (2.4 miles north-east) and Blackburn Royal Infirmary (4.3 miles south-east). For a walk, there’s Brockholes.
Towns and villages near Myerscough Smithy
Other services in Myerscough Smithy
Keeping it looking good
To keep it looking its best:
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
How it works
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow the best part of a day. Before we go, we will explain when it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
- Have a window or extractor fan available
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Read more
Landlords, agents and businesses in Myerscough Smithy
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Common problems we fix in Myerscough Smithy
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- Staining under the taps and around the waste
- Chips and rust in more than one place
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Before you book anyone
- Whether a trained technician does the job
- Whether the price covers travel
- What preparation is included
- A fixed quote, and whether VAT is included
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Myerscough Smithy customers choose us
- Dust sheets down, tidy finish
- Usually one visit, start to finish
- No need to remove anything
- Colours mixed by hand to suit your surface
Take a look at our prices page or guide to resurfacing and replacement costs.
FAQs for Myerscough Smithy
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Do you cover the entire of Blackburn with Darwen?
Everywhere in the UK, Myerscough Smithy included. There’s no extra charge for travel.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
How do I get a price for bath re-enamelling in Myerscough Smithy?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
About our accreditations · Every repair comes with a one-year guarantee.
